Advanced Phone Features
171
You can use the BLF List keys in the following ways:
When the monitored user is idle, press the BLF list key to dial out the phone number.
When there is already an active call on the IP phone, you can transfer the active call to the
monitored user by pressing the BLF List key. The phone handles the active call differently
depending on the configuration of transfer mode via Dsskey with the BLF list key. For more
information on the transfer mode on DSS key, refer to Configuring Transfer Mode on DSS
Key on page 166.
When the monitored user receives an incoming call, press the BLF list key to pick up the
call directly. Before picking up an incoming call, ensure that the BLF List Pickup Code has
been configured in advance. If the code is not configured, the phone will place a call to the
monitored user instead of picking up the incoming call of the monitored user when you
press the BLF List key.
When there is a conversation on the monitored user, press the BLF list key to barge in and
set up a conference call. Before barging in an active call, ensure that the BLF List Barge In
Code has been configured in advance. If the code is not configured, the phone will place a
call to the monitored user instead of barging in an active call of the monitored user when
you press the BLF List key.
When a call is being parked against the monitored phone, press the BLF List key to retrieve
the parked call from the monitored user. Before retrieving the parked call, ensure that the
BLF List Retrieve Call Parked Code has been configured in advance. If the code is not
configured, the phone will place a call to the monitored user instead of retrieving the
parked call when you press the BLF List key.
To configure BLF List settings via web user interface:
1. Click on Account->Advanced.
2. Select the desired account from the pull-down list of Account.
3. Enter the BLF List URI in the BLF List URI field.
4. (Optional.) Enter the directed call pickup code in the BLF List Pickup Code field.
5. (Optional.) Enter the barge-in code in the BLF List Barge In Code field.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
