User Guide for the SIP-T54S Media IP Phone
206
The LED indicators of the line key 2 on phone A will illuminate solid red and phone B will
illuminate solid green indicating that there is an active call on the line key 2. Meanwhile, The LED
indicators of the line key 1 phone A will illuminate solid green and phone B will illuminate solid
red indicating that there is an active call on the line key 1.
Note
Placing a Call on Hold
To place a call on public hold:
1. Press or the Hold soft key on phone A when party A and party C are talking.
The line key LEDs on phone A slowly flash green and phone B slowly flash red when the
shared line call is placed on hold.
To place a call on private hold:
1. Press the PriHold soft key or private hold key on phone A when there is an active call on
the shared line (You may need to press the More soft key to see the PriHold soft key).
The line key LED flashes green slowly on phone A when the shared line call is placed on
private hold.
If the number of incoming calls is greater than the configured line keys, the line keys will be used
by sequence circulation.
To Next Page
Loading...
