Yealink SIP-T54S - Page 48

User Guide for the SIP-T54S Media IP Phone
36
Input Mode
Keypad
2aB
abc
Abc
(initials in
capitals)
ABC
123
#
#
#
#
#
To enter or edit data:
Do one of the following:
If you want to
Then you can
Enter only digits (1),
uppercase (A) characters,
lowercase (a) characters, or
alphanumeric (2aB)
characters.
Press a keypad key one or more times (depending
on what input mode you’re in) to enter the
characters that is displayed on the keypad key.
You can press the abc soft key one or more times
to switch among uppercase (ABC soft key),
numeric (123 soft key), alphanumeric (2aB soft
key), uppercase and lowercase (Abc soft key) and
lowercase (abc soft key) input modes.
For example, if the input mode is ABC:
- To enter “A”, press once.
- To enter “B”, press twice quickly.
- To enter “C”, press three times quickly.
- To enter “2ÄÆÅÀÁÂÃÇ”, press more
than three times quickly.
Note: When you are in the uppercase (ABC soft
key), uppercase and lowercase (Abc soft key) or
lowercase (abc soft key) input mode,
is not available.
Enter special characters.
Press the keypad key or , or
press .
For Key:
- If it is in the uppercase (ABC soft key),
uppercase and lowercase (Abc soft key) or
lowercase (abc soft key) input mode, it will
provide the space character.
- If it is in the numeric (123 soft key) or
alphanumeric (2aB soft key) input mode, it
will only provide the digit 0.
- If it is in the numeric (123) or alphanumeric
(2aB) input mode, it will provide the special
character + by long pressing about 2 seconds