| Getting Started | 8
Power LED Indicator
LED Status Description
Red The phone is initializing.
Fast-flashing red (300ms) The phone is ringing.
Slowly-flashing red (1s) The phone receives a voicemail or misses a call.
Red for 500ms and off for 3s
alternately
The phone enters power-saving mode.
Note: The above introduces the default LED status. Your system administrator can configure the
status of the power LED indicator.
Accessing Screens on Yealink Teams Phones
You can click the soft key corresponding to the menu bar at the bottom of the screen to access the
following screens easily.
• Home Screen
• Accessing the Calls Screen
• Accessing the Voicemail Screen
• Accessing the People Screen
Home Screen
The Home screen is displayed after the phone startup.
To Next Page
Loading...
