User Guide W52P/W52H IP DECT Phone
6
To charge the handset:
1. After setting up the handset and charger cradle, place the handset in the charger
cradle.
The original handset included in the W52P package is pre-registered to the base station.
After charging, the handset is ready to use.
Battery Charging Status
The charge status of batteries displays in the top right-hand corner of the LCD screen:
Icon Charge Status
Fully Charged
75% Charged
50% Charged
25% Charged
10% Charged
Almost Flat
To Next Page
Loading...
