Yealink W52H

User Guide W52P/W52H IP DECT Phone
16
7. Select Handset to view the handset status.
8. Press or to scroll through the list and view the specific information.
The base station supports up to 5 lines. You can register an account for each line via the
web user interface. To log in the web user interface of the base station, you should
obtain the IP address of the base station in advance. For more information on obtaining
the IP address, refer to Checking System Status on page 15.
To register an account via web user interface:
1. Enter the IP address of the base station in the address bar of the browser and press
the Enter key.
2. Enter the username and password in the corresponding fields and click Confirm.
You should log in as an administrator. The default username and password for the
administrator are both ―admin‖.
3. Click on Phone->Account->Basic.
4. Select the desired account from the pull-down list of Account.
5. Select Enabled from the pull-down list of Account Active.
6. Enter the desired values in the Label, Display Name, Register Name, User Name,
Password and SIP Server fields respectively. Contact your system administrator for
more information.
7. Click Confirm to accept the change.
You can register up to 5 lines to one base station. The status of each registered line can
be checked using the menu of the handset.
To check the line status of handset:
1. Press to enter the main menu.
2. Select Line Status.
All lines registered to the base station display on the LCD screen with some icons to
indicate their status. For example, the icon in the bottom of a line indicates that
the handset has no privilege to place a call using this line.