Yealink W56P - Page 82

User Guide for the W56P IP DECT Phone
68
- Press or to adjust the volume of the currently engaged audio devices
(earpiece, earphone or loudspeaker).
You can cancel the dialing operation by pressing the on-hook key. The call duration is
displayed on the LCD screen while the call is in progress.
You can make free internal calls between the handsets registered to the same base
station. You can place an internal call to one handset or all handsets registered to the
same base station.
Note
To place an internal call to one handset via the handset:
1. Press to enter the main menu.
2. Select Intercom.
The LCD screen displays all registered handset names and the All HS option.
3. Press or to highlight the desired handset name.
4. Press , , or the OK soft key to dial out.
To place an internal call to all handsets via the handset:
1. Press to enter the main menu.
2. Select Intercom.
The LCD screen displays all registered handset names and the All HS option.
3. Press or to highlight All HS.
4. Press , , or the OK soft key to dial out.
All other subscribed handsets will ring simultaneously.
You can place external calls on the handset. External calls based on the public
telephone network require the use of SIP lines. Your system administrator needs to
assign the SIP line to the handset beforehand, and then assign the line to the handset as
the outgoing line. For more information on the outgoing line, refer to Outgoing Lines on
page 56.
Note
The handset must be subscribed and registered to the same base station to place a call.
For more information on registration, refer to Handset Registration on page 24.
The handset must be subscribed and registered to the same base station to place a call.
For more information on registration, refer to Handset Registration on page 24.