MyPBX U100/U200 Administrator Guide
182/195
·Format USB
Formatting will erase all data on the USB, and initialize the USB Device.
·Clear USB
Clearing will erase all data on the USB.
·Remove USB Safely
When ticked, the USB Device will be removed safely.
Warning: Please do not remove USB device when recording a call, or else USB
device will be damaged.
To remove the USB device, click the button "Remove USB Safely" and follow the
instructions.
Notes:
1. When 95% of the USB device’s storage space is used up, the system will
automatically delete the old recordings in a chronological manner until the
used space is smaller than 85%.
2. Every second of a call recording uses about 8 KB space. The following shows
the storage capacity of USB device and its relevant recording hours.
Storage Capacity 2GB
Figure J-8
3.2 Recording Settings
1) General Preferences
Note: Before enabling call recording, please make sure that the USB storage or
the Net Disk performs well.
·Enable Call Recording
Enable this function here. You can tick:
a. Record Inbound calls
b. Record Outbound calls
c. Record Internal calls
d. Record Callback calls
e. Record Conferences calls.
·Storage Location
After enabling Call recording, you can choose where to store the recordings, in
the Network Disk or in the USB.
To Next Page
Loading...
Need help?
General
