MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 138
Figure D-2
Step3. Configure phones on MyPBX auto-provision page.
1. Login MyPBX web interface, „PBX‟ -> „Extensions‟ -> „Phone Provisioning‟ ->
„Add Phone‟.
Figure D-3
2. Fill in the phone detail message on the pop-up windows.
Input IP Phone‟s MAC address, configure Name, Call waiting, Line, Extension,
Label, Line active for the phone. And also you can configure other features on
the phone, like codecs, memory keys etc.