Yeastar Technology MyPBX U100 User Manual

MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 139
Figure D-4
Step4. Turn on the power and connect the network cable to IP Phone.
Remark: The factory default setting of DHCP for IP Phone is enable, so you can
skip this step to step 5.
If the DHCP is disable, please follow below step to enable it. (e.g.: Yealink‟s IP
Phone).
1. Login IP phone‟s web page.
2. Enable DHCP.

Yeastar Technology MyPBX U100 Specifications

General

Brand	Yeastar Technology
Model	MyPBX U100
Category	Telephone Accessories
Language	English