MyPBX U100&U200 Administrator's Guide
www.yeastar.com Page 55
Or else, it should be “No”.
· MAC address
Input the MAC address of IP phone
·Name
Put the name of this Phone here.
·Manufacturer
You can choose the Manufacturer of IP phone
·Phone Type
Choose the model of your phone. Only for snom phone
·Call Waiting
This call feature allows your phone to accept other incoming calls to an
extension already in an active call.
·Key as Send
Configure the key as send, you choose # ,* or disable it
·Auto redial
Enable the auto redial for IP Phone
·Auto answer
Configure if auto answer is allowed for IP phone
·Phone book
Enable the feature of phone book of IP phone
·Line
You can set each line of IP phone for the account you want, active or not.
Extension: Selected the extension number for IP Phone.
Label: It is shown on the LCD for users to identify the account.
Line Active: You can choose on/off to enable/disable the account respectively.
2) Codecs
In this page, we can set the codecs for IP phone.
To Next Page
Loading...
Need help?
General
