N824 User Manual
98
Figure 20-7 Reset and Reboot
System Logs
The N824 supports to monitor important system logs, including hardware log, web log
and debug log.
Go to Status→Reports→ System Logs to check the system logs.
Figure 20-8 System Logs
Enable Hardware Log
Save the information of hardware; (up to 4 log files)
Enable Web Log
Save the history of web operations (up to 2 log files)
Enable Debug Log
Save debug information (up to 2 log files)
Tick the option, the following picture shows. Set the debug level and which IP
address to monitor to capture the debug logs.
Figure 20-9 Debug Preferences
To Next Page
Loading...
