N824 User Manual
46
5) Fax Detection
Enable or disable the "Fax Detection" functionality on this route.
Figure 8-7 Inbound Route-Fax Detection
No Detect
No attempts are made to auto-determine the call type. All calls are sent to the
defined destination.
Custom Email
Customize an E-mail address to receive the faxes. You should first configure the
―Voicemail Settings->SMTP Settings for Voicemail‖ correctly before you use this
option.
Faxes
Send faxes to an extension. If choosing a FXS extension here, the fax will be sent
to the FXS port selected, you should connect a fax machine to this FXS port. If
choosing a VoIP extension, the fax will be sent to the extension’s voicemail as an
attachment.
Note:
If you want to receive faxes with custom Email address, the SMTP Settings should be
configured successfully in advance. If you want to receive faxes with E-mail address
configured in VoIP extension voicemail, you should first make sure the tested email to
your email address works fine.
PIN Settings
Go to PBX→Advanced Settings→ PIN Settings to create a PIN list. The PIN lists
can be selected to access restricted features. The PIN can also be added to the CDR
record’s ―Account Code‖ field. PIN list can be applied to Outbound Route.
Figure 8-8 PIN Settings
To Next Page
Loading...
Need help?
General
