N824 User Manual
74
Call Parking
Call Parking is a feature that allows the user to put a call on hold at one phone and
continue the conversation from any other phone. Call parking is activated by feature
code. For example, extension 8010 is in a call, but the person needs to go to another
place to find the answer for a question. He can dial Call Parking feature code on the
phone, and system will prompt that the call is parked at an extension, i.e. 690.Then
this person can hang up the call and leave. When he finds the information, he can pick
up any phone nearby and dial 690 to resume the conversation.
Uses of Call Parking
Call parking is often useful in buildings with many offices or with more than one floor,
and with most of the areas having access to one or more telephone sets.
If the desired called party is not the person who picked up the call, and the
desired called party is at an unknown location, the person who picked up the call
may park the call and then use the public address system to page the desired
called party to pick up the call.
During a conversation, a person may need to go to another office for some
reason (for example, to retrieve an important file); parking the call allows this
person to continue the conversation after arriving at the other office.
Speed Dialing
Sometimes you may just need to call someone quickly without having to look up
his/her phone number. You can by simply define a shortcut number. Speed Dial
feature is available on N824 that allowing you to place a call by pressing a
reduced number of keys.
Add a Speed Dial
1. Go toPBX→Outbound Call Control→Speed DialSettings, you can see the
default Speed Dial Prefix is *99. Please avoid conflict with other feature codes if
you want to change the prefix.
2. Click to add one Speed Dial.
3. Fill in the Source Number and Destination Number.
Number for the number you want to call.
Speed Dial Code for speed dialing number.
To Next Page
Loading...
Need help?
General
