Yeastar Technology N824 User Manual

N824 User Manual
76
Auto Recording
This chapter explains how to configure auto recording on N824 and how to manage
the recording files.
 Auto Recording Settings
 SD Card Management
 Store Recordings to Network Disk
 Share Recordings
Auto Recording Settings
N824 supports auto recording for an established call. Go to System→ Auto
Recording Settings→ Recording Settings to configure auto recording settings.
Note: before enabling call recording, please make sure that the SD card or the Net
Disk performs well.
Table 16-1 Auto Recording Configurations
General Preferences
Enable Call Recording
Enable or Disable Auto Recording feature.
You can choose:
 Record Inbound calls
 Record Outbound calls
 Record Internal calls
Storage Location
After enabling Call recording, you can choose where to
store the recordings, in the Network Disk or in the SD
card.
 Status: shows if the SD card or Network Disk is
successfully mounted to N824.
Record Inbound Prompt
If Call Recording is enabled, the caller will hear the
preconfigured prompt when the inbound calls go through
trunks.
 Written to the Recording file:
If enabled, the prompt will be recorded.
Record Outbound Prompt
If Call Recording is enabled, the callee will hear the
preconfigured prompt when the outbound calls go through
trunks.
 Written to the Recording file:
If enabled, the prompt will be recorded.
Apply To
Record Trunks
When ticked, all calls through the selected trunks will be

Yeastar Technology N824 Specifications

General

Brand	Yeastar Technology
Model	N824
Category	PBX
Language	English