Yeastar Technology N824 User Manual

N824 User Manual
47
Blacklist
Blacklist is used to block an incoming/outgoing call. If the number of
incoming/outgoing call is registered in the number blacklist, the caller will hear the
following prompt: ―The number you have dialed is not in service. Please check the
number and try again‖. The system will then disconnect the call.
Go to PBX→Advanced Settings→Blacklistto add numbers to the blacklist.
You can choose to block the number for inbound, outbound or both.
 If the type is ―inbound‖, then this number can’t be called.
 If the type is ―outbound‖, then the extensions in N824 can’t call this number.
Figure 8-9 Number Blacklist

Yeastar Technology N824 Specifications

General

Brand	Yeastar Technology
Model	N824
Category	PBX
Language	English