YOKOGAWA 436106 User Manual

vii
IM 04P01B01-17E
• Entering Values
Use the
key or SHIFT + key to move the cursor. Use the key or SHIFT
+
key to change a digit value. You repeat these steps to enter the value.
SHIFT key + key
key
Target digit
A=000.000.000.000
SHIFT key + key
key
A=000.000.000.000
When you press the key, the change is applied and the next setup item is
displayed.
• Entering Characters
Use the
key or SHIFT + key to move the cursor.
Use the CHARACTER key or SHIFT + CHARACTER key to select the character type.
Select the character type
CHARACTER key or
SHIFT key + CHARACTER key
Cursor
Host=ABCDefgh2004
CHR:A-Z
The character type changes in the following order: uppercase alphabet (A-Z),
lowercase alphabet (a-z), numbers (0-9), and symbols (%-.).
A-Z A to Z, and space
a-z a to z, and space
0-9 0 to 9, and space
%-. %, #, °, @, +, −, *, /, (, ), µ, Ω,
2
,
3
, ., and space
Use the key or SHIFT + key to select a character.
You repeat these steps to set the character string.
key
SHIFT key + key
Host=ABCDefgh2004
CHR:A-Z
When you press the key, the change is applied and the next screen is displayed.
Inserting Characters
Press the
key or SHIFT + key to move the cursor to the position where the
character is to be inserted.
Press the CHARACTER key or SHIFT + CHARACTER key to show Ins DISP and
then press the
key. A space for one character is inserted. Enter the character.
Host=ABCDefgh2004
CHR:Ins DISP
Position to insert the character
Display Ins DISP
Deleting a Character
Use the key or SHIFT + key to move the cursor to the character to be
deleted.
Press the CHARACTER key or SHIFT + CHARACTER key to show Del DISP and
then press the
key. The character is deleted.
Names of Parts and Basic Key Operations

YOKOGAWA 436106 Specifications

General

Brand	YOKOGAWA
Model	436106
Category	Measuring Instruments
Language	English