5-21
IM 701310-17E
Commands
Command Function Page
STARt Group
:STARt
Starts the waveform acquisition. 5-139
STATus Group
:STATus?
Queries all settings related to the communication status function. 5-140
:STATus:CONDition?
Queries the contents of the condition register. 5-140
:STATus:EESE
Sets the extended event enable register or queries the current setting. 5-140
:STATus:EESR?
Queries the content of the extended event register and clears the register. 5-140
:STATus:ERRor?
Queries the error code and message information (top of the error queue). 5-140
:STATus:FILTer<x>
Sets the transition filter or queries the current setting. 5-140
:STATus:QENable
Sets whether to store messages other than errors to the error queue or
queries the current setting.
5-140
:STATus:QMESsage
Sets whether or not to attach message information to the response to the
“STATus:ERRor?” query or queries the current setting.
5-140
:STATus:SPOLl? (Serial Poll)
Executes serial polling. 5-140
STOP Group
:STOP
Stops the waveform acquisition. 5-141
SYSTem Group
:SYSTem?
Queries all settings related to the system. 5-142
:SYSTem:CLICk
Turns ON/OFF the click sound or queries the current setting. 5-142
:SYSTem:CLOCk?
Queries all settings related to the date, time, and time difference with respect
to GMT.
5-142
:SYSTem:CLOCk:DTIMe
Sets the date, time, and time difference with respect to GMT or queries the
current setting.
5-142
:SYSTem:CLOCk:MODE
Turns ON/OFF the date, time, and time difference with respect to GMT or
queries the current setting.
5-142
:SYSTem:FORMat:IMEMory[:
EXECute]
Formats the internal memory. 5-142
:SYSTem:FORMat:IHDD[:EXECute]
Formats the internal hard disk. 5-142
:SYSTem:FORMat:SDELete[:EXECute]
(Sure Delete)
Clears and formats the internal memory. 5-142
:SYSTem:LANGuage
Sets the message language or queries the current setting. 5-142
:SYSTem:MFSize
Sets the menu font size or queries the current setting. 5-142
:SYSTem:MLANguage
Sets the menu language or queries the current setting. 5-142
:SYSTem:OVERview
Displays system information. 5-142
:SYSTem:USBKeyboard
Sets the USB keyboard type or queries the current setting. 5-142
TELecomtest Group
:TELecomtest?
Queries all settings related to the telecom test. 5-143
:TELecomtest:CATegory
Sets the telecom test type or queries the current setting. 5-143
:TELecomtest:DISPlay
Turns ON/OFF the telecom test display or queries the current setting. 5-143
:TELecomtest:EYEPattern?
Queries all settings related to the eye pattern. 5-143
:TELecomtest:EYEPattern:ALL
Turns ON/OFF all eye pattern parameters. 5-143
:TELecomtest:
EYEPattern:<Parameter>?
Queries all settings related to the waveform parameter of the eye pattern. 5-143
:TELecomtest:
EYEPattern:<Parameter>:STATe
Turns ON/OFF the waveform parameter of the eye pattern or queries the
current setting.
5-144
:TELecomtest:
EYEPattern:<Parameter>:VALue?
Queries the waveform parameter value of the eye pattern. 5-144
:TELecomtest:EYEPattern:
TLEVels?
Queries all settings related to the threshold level of the eye pattern. 5-144
:TELecomtest:EYEPattern:
TLEVels:MODE
Sets the unit of the threshold level of the eye pattern or queries the current
setting.
5-144
:TELecomtest:EYEPattern:
TLEVels:PERCent
Sets the threshold level of the eye pattern as a percentage or queries the
current setting.
5-144
:TELecomtest:EYEPattern:
TLEVels:UNIT
Sets the threshold level of the eye pattern in UNIT or queries the current
setting.
5-144
:TELecomtest:EYEPattern:VDARk
Sets the dark level (zero light level) or queries the current setting. 5-144
5.1 List of Commands
To Next Page
Loading...
