YOKOGAWA DLM2000 Series User Manual

5-102
IM 710105-17E
:FILE:SAVE:{AHIStogram|ASCii|BINary|
FFT|HLISt|HARMonics|MEASure|SBUS|SET
up|SNAP|ZWAVe}:ABORt
Function Aborts the saving of a specific type of data.
Syntax
:FILE:SAVE:{AHIStogram|ASCii|BINary|F
FT|HLISt|HARMonics|MEASure|SBUS|SETup
|SNAP|ZWAVe}:ABORt
Example (Below is an example for waveform data.)
:FILE:SAVE:BINARY:ABORT
:FILE:SAVE:{AHIStogram|ASCii|BINary|
FFT|HLISt|HARMonics|MEASure|SBUS|SET
up|SNAP|ZWAVe}[:EXECute]
Function Saves a specific type of file. This is an overlap
command.
Syntax
:FILE:SAVE:{AHIStogram|ASCii|BINary|
FFT|HARMonics|MEASure|SBUS|SETup|SNAP
|ZWAVe}[:EXECute] {<File name>}
Example (Below is an example for waveform data.)
:FILE:SAVE:BINARY:EXECUTE "DATA"
:FILE:SAVE:{AHIStogram|FFT|HARMonics
|SBUS|ZWAVe}:SELect
Function Sets or queries the area of a specific type of data
to save.
Syntax
:FILE:SAVE:AHIStogram:SELect {<NRf>}
:FILE:SAVE:AHIStogram:SELect?
<NRf> = 1 or 2 (1 to 4 for ZWAVe)
Example (Below are examples for FFT.)
:FILE:SAVE:FFT:SELECT 1
:FILE:SAVE:FFT:SELECT?
-> :FILE:SAVE:FFT:SELECT 1
:FILE:SAVE:ANAMing
Function Sets or queries the on/off status of the auto
naming feature for saving files.
Syntax
:FILE:SAVE:ANAMing {DATE|DATE2|
NUMBering|OFF|ON}
:FILE:SAVE:ANAMing?
Example
:FILE:SAVE:ANAMING DATE
:FILE:SAVE:ANAMING?
-> :FILE:SAVE:ANAMING DATE
:FILE:SAVE:{ASCii|BINary}:COMPressi
on
Function Sets or queries the save compression method of a
specific type of data.
Syntax
:FILE:SAVE:{ASCii|BINary}:COMPressi
on {DECimation|OFF|PTOPeak}
:FILE:SAVE:{ASCii|BINary}:COMPressi
on?
Example (Below is an example for waveform data.)
:FILE:SAVE:BINARY:COMPRESSION DECIMAT
ION
:FILE:SAVE:BINARY:COMPRESSION?
-> :FILE:SAVE:BINARY:COMPRESSION DECI
MATION
:FILE:SAVE:{ASCii|BINary}:HISTory
Function Sets or queries how history waveforms will be
saved.
Syntax
:FILE:SAVE:{ASCii|BINary}:HISTory {AL
L|AVERage|ONE}
:FILE:SAVE:{ASCii|BINary}:HISTory?
Example (Below is an example for waveform data.)
:FILE:SAVE:BINARY:HISTORY ALL
:FILE:SAVE:BINARY:HISTORY?
-> :FILE:SAVE:BINARY:HISTORY ALL
:FILE:SAVE:{ASCii|BINary}:LENGth
Function Sets or queries the number of data points to save
when compressing or sampling (decimating)
various types of data.
Syntax
:FILE:SAVE:{ASCii|BINary}:LENG
th {<NRf>}
:FILE:SAVE:{ASCii|BINary}:LENGth?
<NRf> = See the DLM2000 Features Guide for
this information.
Example (Below is an example for waveform data.)
:FILE:SAVE:BINARY:LENGTH
:FILE:SAVE:BINARY:LENGTH?
-> :FILE:SAVE:BINARY:LENGTH 1250
:FILE:SAVE:{ASCii|BINary}:RANGe
Function Sets or queries the save range for a specific type
of data.
Syntax
:FILE:SAVE:{ASCii|BINary}:RANGe {MAIN
|Z1|Z2}
:FILE:SAVE:{ASCii|BINary}:RANGe?
Example (Below is an example for waveform data.)
:FILE:SAVE:BINARY:RANGE MAIN
:FILE:SAVE:BINARY:RANGE?
-> :FILE:SAVE:BINARY:RANGE MAIN
:FILE:SAVE:{ASCii|BINary}:TRACe
Function Sets or queries the waveforms to save for a
specific type of data.
Syntax
:FILE:SAVE:{ASCii|BINary}:TRACe {<NRf
>|ALL|MATH<x>}
:FILE:SAVE:{ASCii|BINary}:TRACe?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> = 1 or 2 (1 only for 2-channel models)
Example (Below is an example for waveform data.)
:FILE:SAVE:BINARY:TRACE 1
:FILE:SAVE:BINARY:TRACE?
-> :FILE:SAVE:ASCII:TRACE 1
5.12 FILE Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English