YOKOGAWA DLM2000 Series User Manual

5-135
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
COPY
Function Copies the on/off status of all measurement items
of a waveform in Area2 to all other waveforms.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:C
OPY
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:AREA2:COPY
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
CYCLe
Function Sets or queries a cycle mode in Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:C
YCLe {ONE|N|OFF}
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:C
YCLe?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:AREA2:CYCLE ONE
:MEASURE:CHANNEL1:AREA2:CYCLE?
-> :MEASURE:CHANNEL1:AREA2:CYCLE ONE
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay?
Function Queries all of the settings for measuring the delay
between channels of a waveform in Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay:MEASure?
Function Queries all of the settings for a source waveform
for measuring the delay between channels of a
waveform in Area2.
Syntax :MEASure:{CHANnel<x>|MATH<x>}:AREA2:DEL
ay:MEASure? <x> of CHANnel<x> = 1 to 4 (1
or 2 for 2-channel models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay:MEASure:COUNt
Function Sets or queries the count number of a source
waveform for measuring the delay between
channels of a waveform in Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:MEASure:COUNt {<NRf>}
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:MEASure:COUNt?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
<NRf> = 1 to 10
Example
:MEASURE:CHANNEL1:AREA2:DELAY:
MEASURE:COUNT 2
:MEASURE:CHANNEL1:AREA2:DELAY:
MEASURE:COUNT?
-> :MEASURE:CHANNEL1:AREA2:DELAY:MEAS
URE:COUNT 2
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay:MEASure:SLOPe
Function Sets or queries the slope of a source waveform
for measuring the delay between channels of a
waveform in Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:MEASure:SLOPe {FALL|RISE}
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:MEASure:SLOPe?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:AREA2:DELAY:
MEASURE:SLOPE FALL
:MEASURE:CHANNEL1:AREA2:DELAY:
MEASURE:SLOPE?
-> :MEASURE:CHANNEL1:AREA2:DELAY:MEAS
URE:SLOPE FALL
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay:REFerence?
Function Queries all reference waveform settings used
to measure the delay between the specified
waveform and the reference waveform in Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
5.20 MEASure Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English