YOKOGAWA DLM2000 Series - Page 169

5-136
IM 710105-17E
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay:REFerence:COUNt
Function Sets or queries the edge count of the reference
waveform used to measure the delay between the
specified waveform and the reference waveform in
Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence:COUNt {<NRf>}
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence:COUNt?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
<NRf> = 1 to 10
Example
:MEASURE:CHANNEL1:AREA2:DELAY:REFEREN
CE:COUNT 2
:MEASURE:CHANNEL1:AREA2:DELAY:REFEREN
CE:COUNT?
-> :MEASURE:CHANNEL1:AREA2:DELAY:REFE
RENCE:COUNT 2
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay:REFerence:SLOPe
Function Sets or queries the slope of the reference
waveform used to measure the delay between the
specified waveform and the reference waveform in
Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence:SLOPe {FALL|RISE}
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence:SLOPe?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:AREA2:DELAY:REFEREN
CE:SLOPE FALL
:MEASURE:CHANNEL1:AREA2:DELAY:REFEREN
CE:SLOPE?
-> :MEASURE:CHANNEL1:AREA2:DELAY:REFE
RENCE:SLOPE FALL
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay:REFerence:SOURce
Function Sets or queries whether the reference point for
measuring the delay between channels of a
waveform in Area2 will be set to the trigger point
or a waveform.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence:SOURce {TRACe|
TRIGger}
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence:SOURce?
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:AREA2:DELAY:REFEREN
CE:SOURCE TRACE
:MEASURE:CHANNEL1:AREA2:DELAY:REFEREN
CE:SOURCE?
-> :MEASURE:CHANNEL1:AREA2:DELAY:REFE
RENCE:SOURCE TRACE
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:
DELay:REFerence:TRACe
Function Sets or queries the reference waveform edge
used to measure the delay between the specified
waveform and the reference waveform in Area2.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence:TRACe {<NRf>|MATH<x>}
:MEASure:{CHANnel<x>|MATH<x>}:AREA2:D
ELay:REFerence:TRACe?
<NRf> = 1 to 4 (1 or 2 for 2-channel models)
<x> of CHANnel<x> = 1 to 4 (1 or 2 for 2-channel
models)
<x> of MATH<x> = 1 or 2 (1 only for 2-channel
models)
Example
:MEASURE:CHANNEL1:AREA2:DELAY:REFEREN
CE:TRACE 2
:MEASURE:CHANNEL1:AREA2:DELAY:REFEREN
CE:TRACE?
-> :MEASURE:CHANNEL1:AREA2:DELAY:REFE
RENCE:TRACE 2
5.20 MEASure Group