YOKOGAWA DLM2000 Series User Manual

5-166
IM 710105-17E
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:MFORmat
Function Sets or queries the ID frame format (standard
or extended), which is one of the ID and data
conditions, for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:IDENtifier:MFORmat {EXTended|
STANdard}
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:IDENtifier:MFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:MFORMAT EXTENDED
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:MFORMAT?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:IDENTIFIER:MFORMAT EXTENDED
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:MODE
Function Sets or queries the ID enable/disable condition,
which is one of the ID and data conditions, for
CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:IDENtifier:MODE {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:IDENtifier:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:MODE ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:MODE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:IDENTIFIER:MODE 1
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:PATTern
Function Sets or queries the ID pattern, which is one of the
ID and data conditions, for CAN FD bus signal
searching in binary notation.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:IDENtifier:PATTern {<String>}
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:IDENtifier:PATTern?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:PATTERN "1110000111
1"
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:PATTERN?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:IDENTIFIER:PATTERN "11100001111"
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:PFORmat
Function Sets or queries the ID input format, which is one of
the ID and data conditions, for CAN FD bus signal
searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:IDENtifier:PFORmat {BINary|HE
Xa|MESSage}
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:IDENtifier:PFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:PFORMAT BINARY
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:PFORMAT?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:IDENTIFIER:PFORMAT BINARY
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal?
Function Queries all message and signal settings for the
ID and data conditions for CAN FD bus signal
searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:MSIGnal?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:MESSage:ITEM
Function Sets the message item, which is one of the ID and
data conditions, for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:MSIGnal:MESSage:ITEM {<String>}
<x> = 1 to 4
<String> = Up to 32 characters
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:MESSAGE:ITEM "TEST"
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SELect
Function Sets or queries the message and signal condition,
which is one of the ID and data conditions, for
CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:MSIGnal:SELect {MESSage|SIGNa
l}
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:MSIGnal:SELect?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SELECT MESSAGE
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SELECT?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:MSIGNAL:SELECT MESSAGE
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English