YOKOGAWA DLM2000 Series User Manual

5-167
IM 710105-17E
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal?
Function Queries all signal settings for the ID and data
conditions for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:MSIGnal:SIGNal?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:CONDition
Function Sets or queries the signal data condition, which is
one of the ID and data conditions, for CAN FD bus
signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:MSIGnal:SIGNal:CONDition {BETWee
n|EQUal|GREater|LESS|NOTBetween|NOTEq
ul}
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:MSIGnal:SIGNal:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SIGNAL:CONDITION BETWE
EN
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SIGNAL:CONDITION?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:MSIGNAL:SIGNAL:CONDITION BETWEEN
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:DECimal<y>
Function Sets a signal’s reference value, which is one of
the ID and data conditions, for CAN FD bus signal
searching in decimal notation.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:DECimal<y> {<NRf
>}
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:MSIGnal:SIGNal:DECimal<y>?
<x> = 1 to 4
<y> = 1 or 2
<NRf> = –9E+18 to 9E+18
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SIGNAL:DECIMAL1 1000
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SIGNAL:DECIMAL1?
-> :SERIALBUS1:CANFD:SEARCH:SET
UP:IDDATA:MSIGNAL:SIGNAL:DECIM
AL1 1.0000000E+03
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:ITEM
Function Sets the signal item, which is one of the ID and
data conditions, for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SET
up[:IDData]:MSIGnal:SIGNal:IT
EM {<String>,<String>}
<x> = 1 to 4
<String> = Up to 32 characters
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SIGNAL:ITEM "Sig_
Test","Mess_Test"
Description Set the signal item first and then the message
item.
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:RTR
Function Sets or queries the RTR value, which is one of
the ID and data conditions, for CAN FD bus signal
searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:RTR {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup[:IDD
ata]:RTR?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:RTR ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:RTR?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:IDD
ATA:RTR 1
:SERialbus<x>:CANFD:SEARch:SETup:MO
DE
Function Sets or queries the CAN FD bus signal search
mode setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:MO
DE {EFRame|ESI|FDF|IDData|SOF}
:SERialbus<x>:CANFD:SEARch:SETup:MO
DE?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:MO
DE EFRAME
:SERIALBUS1:CANFD:SEARCH:SETUP:MODE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:MO
DE EFRAME
:SERialbus<x>:DECode?
Function Queries all settings related to the decoding of
serial bus signals.
Syntax
:SERialbus<x>:DECode?
<x> = 1 to 4 (1 only for 2-channel models)
5.24 SERialbus Group

YOKOGAWA DLM2000 Series Specifications

General

Brand	YOKOGAWA
Model	DLM2000 Series
Category	Test Equipment
Language	English