YOKOGAWA DLM4038 User Manual

5-67
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:ANALysis:PANalyze<x>:I2T:MEASure:I2
T:VALue?
Function Queries an automatically measured value of a
Joule integral.
Syntax
:ANALysis:PANalyze<x>:I2T:MEASure:I2
T:VALue? [{<NRf>}]
<x> = 1 to 2
<NRf> = 1 to 100000
Example
:ANALYSIS:PANALYZE1:I2T:MEASURE:I2T:
VALUE?
-> :ANALYSIS:PANALYZE1:I2T:MEASURE:I
2T:VALUE 10.0000E+03
Description • If the value is immeasurable, the DLM4000
returns “NAN” (not a number).
• The <NRf> is used to specify which iteration of
automated measurement to query the measured
value from.
• If <NRf> is set to 1, the oldest measured value
in the automated measurement memory is
queried.
• If a measured value does not exist at the
specified iteration, the DLM4000 returns “NAN”
(not a number).
• If <NRf> is omitted, the most recent measured
value is queried.
• If cyclic statistical processing for automated
measurement is being executed and <NRf> is
specified, the measured values over a cycle in
iteration <NRf> from the left of the display on
the displayed waveform is queried. If <NRf>
is omitted, the measured values over the last
cycle on the displayed waveform is queried.
:ANALysis:PANalyze<x>:I2T:RANGe
Function Sets or queries the measurement source window.
Syntax
:ANALysis:PANalyze<x>:I2T:RANGe {MAI
N|Z1|Z2}
:ANALysis:PANalyze<x>:I2T:RANGe?
<x> = 1 to 2
Example
:ANALYSIS:PANALYZE1:I2T:RANGE MAIN
:ANALYSIS:PANALYZE1:I2T:RANGE?
-> :ANALYSIS:PANALYZE1:I2T:RANGE MAI
N
:ANALysis:PANalyze<x>:I2T:SCALe?
Function Queries all scaling settings.
Syntax
:ANALysis:PANalyze<x>:I2T:SCALe?
<x> = 1 to 2
:ANALysis:PANalyze<x>:I2T:SCALe:CENT
er
Function Sets or queries the center value for manual
scaling.
Syntax
:ANALysis:PANalyze<x>:I2T:SCALe:CENT
er {<NRf>}
:ANALysis:PANalyze<x>:I2T:SCALe:CENT
er?
<x> = 1 to 2
<NRf> = −1.0000E+31 to 1.0000E+31
Example
:ANALYSIS:PANALYZE1:I2T:SCALE:CENT
ER 1
:ANALYSIS:PANALYZE1:I2T:SCALE:CENT
ER?
-> :ANALYSIS:PANALYZE1:I2T:SCALE:CEN
TER 1.00000E+00
:ANALysis:PANalyze<x>:I2T:SCALe:MODE
Function Sets or queries the scaling mode.
Syntax
:ANALysis:PANalyze<x>:I2T:SCALe:MO
DE {AUTO|MANual}
:ANALysis:PANalyze<x>:I2T:SCALe:MO
DE?
<x> = 1 to 2
Example
:ANALYSIS:PANALYZE1:I2T:SCALE:MO
DE AUTO
:ANALYSIS:PANALYZE1:I2T:SCALE:MODE?
-> :ANALYSIS:PANALYZE1:I2T:SCALE:MO
DE AUTO
:ANALysis:PANalyze<x>:I2T:SCALe:SENS
itivity
Function Sets or queries the sensitivity of the center
position for manual scaling.
Syntax
:ANALysis:PANalyze<x>:I2T:SCALe:SENS
itivity {<NRf>}
:ANALysis:PANalyze<x>:I2T:SCALe:SENS
itivity?
<x> = 1 to 2
<NRf> = −1.0000E+31 to 1.0000E+31
Example
:ANALYSIS:PANALYZE1:I2T:SCALE:SENSIT
IVITY 10
:ANALYSIS:PANALYZE1:I2T:SCALE:SENSIT
IVITY?
-> :ANALYSIS:PANALYZE1:I2T:SCALE:SEN
SITIVITY 10.0000E+00
:ANALysis:PANalyze<x>:I2T:TRANge
(Time Range)
Function Sets or queries the measurement time period.
Syntax
:ANALysis:PANalyze<x>:I2T:TRAN
ge {<NRf>,<NRf>}
:ANALysis:PANalyze<x>:I2T:TRANge?
<x> = 1 to 2
<NRf> = −5 to 5 divisions (in steps of 10
divisions/display record length)
Example
 :ANALYSIS:PANALYZE1:I2T:TRANGE−4,4
:ANALYSIS:PANALYZE1:I2T:TRANGE?
-> :ANALYSIS:PANALYZE1:I2T:
TRANGE−4.00E+00,4.00E+00
5.3 ANALysis Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English