YOKOGAWA DLM4038 User Manual

5-112
IM DLM4038-17EN
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:HORizontal
Function Sets or queries the horizontal position of the
rectangle that will be used for rectangular zone
determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:HORizontal {<NRf>,<NRf>}
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:HORizontal?
<x> = 1 to 4
<NRf> = −5 to 5 (divisions)
Example
:GONOGO:ZPARAMETER:NUMBER1:
RECTANGLE:HORIZONTAL 1,2
:GONOGO:ZPARAMETER:NUMBER1:
RECTANGLE:HORIZONTAL?
-> :GONOGO:ZPARAMETER:NUMBER1:RECTAN
GLE:HORIZONTAL 2.000E+00,1.000E+00
Description If
:GONogo[:ZPARameter]:NUMBer<x>:RECT
angle:TRACe
set to XY<y>, <NRf> will be –4 to
4 (div).
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:RANGe
Function Sets or queries the source window of the
rectangle that will be used for rectangular zone
determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:RANGe {MAIN|Z1|Z2}
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:RANGe?
<x> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:
RECTANGLE:RANGE MAIN
:GONOGO:ZPARAMETER:NUMBER1:
RECTANGLE:RANGE?
-> :GONOGO:ZPARAMETER:NUMBER1:RECTAN
GLE:RANGE MAIN
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:TRACe
Function Sets or queries the source waveform of the
rectangle that will be used for rectangular zone
determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:TRACe {<NRf>|MATH<y>|XY<y>}
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:TRACe?
<x> = 1 to 4
<NRf> = 1 to 8
<y> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:
RECTANGLE:TRACE 1
:GONOGO:ZPARAMETER:NUMBER1:
RECTANGLE:TRACE?
-> :GONOGO:ZPARAMETER:NUMBER1:RECTAN
GLE:TRACE 1
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:VERTical
Function Sets or queries the vertical position of the
rectangle that will be used for rectangular zone
determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:VERTical {<NRf>,<NRf>}
:GONogo[:ZPARameter]:NUMBer<x>:RECTa
ngle:VERTical?
<x> = 1 to 4
<NRf> = −4 to 4 (divisions)
Example
:GONOGO:ZPARAMETER:NUMBER1:
RECTANGLE:VERTICAL 1,2
:GONOGO:ZPARAMETER:NUMBER1:
RECTANGLE:VERTICAL?
-> :GONOGO:ZPARAMETER:NUMBER1:RECTAN
GLE:VERTICAL 2.000E+00,1.000E+00
:GONogo[:ZPARameter]:NUMBer<x>:WAVE?
Function Queries all waveform zone determination
settings.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE?
<x> = 1 to 4
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:EXIT
Function Exits from the waveform zone edit menu.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:EXIT {QUIT|STORe}
<x> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:
EDIT:EXIT STORE
Description When
STORe
is specified, the edited contents are
saved, and the edit menu is closed.
When
QUIT
is specified, the edit menu is closed
without saving the edited contents.
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:NEW
Function Sets the base waveform in waveform zone
editing.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:NEW {<NRF>|MATH<y>}
<x> = 1 to 4
<NRf> = 1 to 8
<y> of MATH<y> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:
EDIT:NEW 1
Description When you finish editing, you need to use
:GONog
o[:ZPARameter]:NUMBer<x>:WAVE:EDIT:E
XIT
to exit from the edit menu.
5.14 GONogo Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English