YOKOGAWA DLM4038 - Page 146

5-113
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:PART
Function Executes partial editing in waveform zone editing.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:PART {<NRF>,<NRF>,<NRF>,<NRF>}
<x> = 1 to 4
<NRF> = −5.00 to 5.00 (div, T_Range1/T_Range2),
−8.00 to 8.00 (div (difference), up and
down)
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:
EDIT:PART -2.00,2.00,1.00,1.00
Description When you finish editing, you need to use
:GONog
o[:ZPARameter]:NUMBer<x>:WAVE:EDIT:E
XIT
to exit from the edit menu.
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:WHOLe
Function Executes whole editing in waveform zone editing.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
EDIT:WHOLe {<NRF>,<NRF>,<NRF>,<NRF>}
<x> = 1 to 4
<NRF> = −5.00 to 5.00 (div, left and right), 0 to
8.00 (div, up and down)
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:
EDIT:WHOLE 0.50,0.50,1.00,1.00
Description When you finish editing, you need to use
:GONog
o[:ZPARameter]:NUMBer<x>:WAVE:EDIT:E
XIT
to exit from the edit menu.
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
RANGe
Function Sets or queries the source window that will be
used for waveform zone determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
RANGe {MAIN|Z1|Z2}
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
RANGe?
<x> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:RAN
GE MAIN
:GONOGO:ZPARAMETER:NUMBER1:WAVE:RAN
GE?
-> :GONOGO:ZPARAMETER:NUMBER1:WAVE:R
ANGE MAIN
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
TRACe
Function Sets or queries the source waveform that will be
used for waveform zone determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
TRACe {<NRf>|MATH<y>}
:GONogo:ZPARameter:NUMBer<x>:WAVE:TR
ACe?
<x> = 1 to 4
<NRf> = 1 to 8
<y> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:TRA
CE 1
:GONOGO:ZPARAMETER:NUMBER1:WAVE:TRA
CE?
-> :GONOGO:ZPARAMETER:NUMBER1:WAVE:T
RACE 1
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
TRANge
Function Sets or queries the determination area that will be
used for waveform zone determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
TRANge {<NRf>,<NRf>}
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
TRANge?
<NRf> = −5 to 5 (divisions)
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:TRAN
GE 1,2
:GONOGO:ZPARAMETER:NUMBER1:WAVE:TRAN
GE?
-> :GONOGO:ZPARAMETER:NUMBER1:WAVE:T
RANGE 2.000E+00,1.000E+00
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
ZNUMber
Function Sets or queries the zone number that will be used
for waveform zone determination.
Syntax
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
ZNUMber {<NRf>}
:GONogo[:ZPARameter]:NUMBer<x>:WAVE:
ZNUMber?
<x> = 1 to 4
<NRf> = 1 to 4
Example
:GONOGO:ZPARAMETER:NUMBER1:WAVE:ZNUM
BER 1
:GONOGO:ZPARAMETER:NUMBER1:WAVE:ZNUM
BER?
-> :GONOGO:ZPARAMETER:NUMBER1:WAVE:Z
NUMBER 1
5.14 GONogo Group