YOKOGAWA DLM4038 - Page 159

5-126
IM DLM4038-17EN
:LOGic:PODA_PODB:BUS2:LABel
Function Sets or queries the label of a bus of logic input
ports A and B.
Syntax
:LOGic:PODA_PODB:BUS2:
LABel {<String>}
:LOGic:PODA_PODB:BUS2:LABel?
<String> = Up to 8 characters
Example
:LOGIC:PODA_PODB:BUS2:LABEL "ABC"
:LOGIC:PODA_PODB:BUS2:LABEL?
-> :LOGIC:PODA_PODB:BUS2:LABEL "ABC"
Description An error will occur if 16 bit input (/L16 option) is
not supported.
:LOGic:PODA_PODB:BUS3?
Function Queries all bus settings of logic input ports A and
B.
Syntax
:LOGic:PODA_PODB:BUS3?
Example
:LOGIC:PODA_PODB:BUS3?
Description An error will occur if 16 bit input (/L16 option) is
not supported.
:LOGic:PODA_PODB:BUS3:ASSignment
Function Sets or queries the assignment of a bus of logic
input ports A and B.
Syntax
:LOGic:PODA_PODB:BUS3:
ASSignment {<String>}
:LOGic:PODA_PODB:BUS3:ASSignment?
<String> = Up to 16 characters
Example
:LOGIC:PODA_PODB:BUS3:
ASSIGNMENT "ABC"
:LOGIC:PODA_PODB:BUS3:ASSIGNMENT?
-> :LOGIC:PODA_
PODB:BUS3:ASSIGNMENT "ABC"
Description An error will occur if 16 bit input (/L16 option) is
not supported.
:LOGic:PODA_PODB:BUS3:DISPlay
Function Sets or queries the display on/off status of a bus
of logic input ports A and B.
Syntax
:LOGic:PODA_PODB:BUS3:
DISPlay {<Boolean>}
:LOGic:PODA_PODB:BUS3:DISPlay?
Example
:LOGIC:PODA_PODB:BUS3:DISPLAY ON
:LOGIC:PODA_PODB:BUS3:DISPLAY?
-> :LOGIC:PODA_PODB:BUS3:DISPLAY 1
Description An error will occur if 16 bit input (/L16 option) is
not supported.
:LOGic:PODA_PODB:BUS3:FORMat
Function Sets or queries the display format (bus display) of
a bus of logic input ports A and B.
Syntax
:LOGic:PODA_PODB:BUS3:FORMat {HEX|
BINary}
:LOGic:PODA_PODB:BUS3:FORMat?
Example
:LOGIC:PODA_PODB:BUS3:FORMAT HEX
:LOGIC:PODA_PODB:BUS3:FORMAT?
-> :LOGIC:PODA_PODB:BUS3:FORMAT HEX
Description An error will occur if 16 bit input (/L16 option) is
not supported.
:LOGic:PODA_PODB:BUS3:LABel
Function Sets or queries the label of a bus of logic input
ports A and B.
Syntax
:LOGic:PODA_PODB:BUS3:
LABel {<String>}
:LOGic:PODA_PODB:BUS3:LABel?
<String> = Up to 8 characters
Example
:LOGIC:PODA_PODB:BUS3:LABEL "ABC"
:LOGIC:PODA_PODB:BUS3:LABEL?
-> :LOGIC:PODA_PODB:BUS3:LABEL "ABC"
Description An error will occur if 16 bit input (/L16 option) is
not supported.
:LOGic:PODA_PODB:MODE
Function Sets or queries the display on/off status of logic
input ports A and B.
Syntax
:LOGic:PODA_PODB:MODE {<Boolean>}
:LOGic:PODA_PODB:MODE?
Example
:LOGIC:PODA_PODB:MODE ON
:LOGIC:PODA_PODB:MODE?
-> :LOGIC:PODA_PODB:MODE 1
Description An error will occur if 16 bit input (/L16 option) is
not supported.
:LOGic:PODA_PODB:POSition
Function Sets or queries the logic signal’s vertical position
of logic input ports A and B.
Syntax
:LOGic:PODA_PODB:POSition {<NRf>}
:LOGic:PODA_PODB:POSition?
<NRf> = −7 to 39
Example
 :LOGIC:PODA_PODB:POSITION−7
:LOGIC:PODA_PODB:POSITION?
->:LOGIC:PODA_PODB:POSITION−7
Description An error will occur if 16 bit input (/L16 option) is
not supported.
5.19 LOGic Group