YOKOGAWA DLM4038 User Manual

5-140
IM DLM4038-17EN
:MEASure:{CHANnel<x>|MATH<x>}
{[:AREA1]|:AREA2}:COPY
Function Copies the on/off status of all measurement
items of a waveform to all other waveforms in the
specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}
{[:AREA1]|:AREA2}:COPY
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
Example
:MEASURE:CHANNEL1:AREA1:COPY
:MEASure:{CHANnel<x>|MATH<x>}
{[:AREA1]|:AREA2}:CYCLe
Function Sets or queries a cycle mode in the specified
area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:{[:ARE
A1]|:AREA2}:CYCLe {ONE|N|OFF}
:MEASure:{CHANnel<x>|MATH<x>}:{[:ARE
A1]|:AREA2}:CYCLe?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
Example
:MEASURE:CHANNEL1:AREA1:CYCLe ONE
:MEASURE:CHANNEL1:AREA1:CYCLE?
-> :MEASURE:CHANNEL1:AREA1:CYCLE ONE
:MEASure:{CHANnel<x>|MATH<x>}
{[:AREA1]|:AREA2}:DELay?
Function Queries all of the settings for measuring the delay
between channels of a waveform in the specified
area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}
{[:AREA1]|:AREA2}:DELay?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:MEASure?
Function Queries all of the settings for a source waveform
for measuring the delay between channels of a
waveform in the specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:MEASure?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:MEASure:COUNt
Function Sets or queries the count number of a source
waveform for measuring the delay between
channels of a waveform in the specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:MEASure:COUNt {<NRf
>}
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:MEASure:COUNt?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
<NRf> = 1 to 10
Example
:MEASURE:CHANNEL1:AREA1:DELAY:MEASUR
E:COUNT 2
:MEASURE:CHANNEL1:AREA1:DELAY:MEASUR
E:COUNT?
-> :MEASURE:CHANNEL1:AREA1:DELAY:MEA
SURE:COUNT 2
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:MEASure:SLOPe
Function Sets or queries the slope of a source waveform
for measuring the delay between channels of a
waveform in the specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:MEASure:SLOPe {FALL
|RISE}
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:MEASure:SLOPe?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
Example
:MEASURE:CHANNEL1:AREA1:DELAY:MEASUR
E:SLOPE FALL
:MEASURE:CHANNEL1:AREA1:DELAY:MEASUR
E:SLOPE?
-> :MEASURE:CHANNEL1:AREA1:DELAY:MEA
SURE:SLOPE FALL
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence?
Function Queries all reference waveform settings used
to measure the delay between the specified
waveform and the reference waveform in the
specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
5.21 MEASure Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English