YOKOGAWA DLM4038 User Manual

5-141
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:COUNt
Function Sets or queries the edge count of the reference
waveform used to measure the delay between the
specified waveform and the reference waveform
in the specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:COU
Nt {<NRf>}
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:COUNt?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 44
<NRf> = 1 to 10
Example
:MEASURE:CHANNEL1:AREA1:DELAY:REFERE
NCE:COUNT 2
:MEASURE:CHANNEL1:AREA1:DELAY:REFERE
NCE:COUNT?
-> :MEASURE:CHANNEL1:AREA1:DELAY:REF
ERENCE:COUNT 2
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:SLOPe
Function Sets or queries the slope of the reference
waveform used to measure the delay between the
specified waveform and the reference waveform
in the specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:SLO
Pe {FALL|RISE}
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:SLOPe?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
Example
:MEASURE:CHANNEL1:AREA1:DELAY:REFERE
NCE:SLOPE FALL
:MEASURE:CHANNEL1:AREA1:DELAY:REFERE
NCE:SLOPE?
-> :MEASURE:CHANNEL1:AREA1:DELAY:REF
ERENCE:SLOPE FALL
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:SOURce
Function Sets or queries whether the reference point
for measuring the delay between channels of
a waveform will be set to the trigger point or a
waveform in the specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:SOUR
ce {TRACe|TRIGger}
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:SOURce?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
Example
:MEASURE:CHANNEL1:AREA1:DELAY:REFERE
NCE:SOURCE TRACE
:MEASURE:CHANNEL1:AREA1:DELAY:REFERE
NCE:SOURCE?
-> :MEASURE:CHANNEL1:AREA1:DELAY:REF
ERENCE:SOURCE TRACE
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:TRACe
Function Sets or queries the reference waveform edge
used to measure the delay between the specified
waveform and the reference waveform in the
specified area.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:TRA
Ce {<NRf>|MATH<y>}
:MEASure:{CHANnel<x>|MATH<x>}{[:AREA
1]|:AREA2}:DELay:REFerence:TRACe?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
<NRf> = 1 to 8
<y> of MATH<y> = 1 to 4
Example
:MEASURE:CHANNEL1:AREA1:DELAY:REFERE
NCE:TRACE 2
:MEASURE:CHANNEL1:AREA1:DELAY:REFERE
NCE:TRACE?
-> :MEASURE:CHANNEL1:AREA1:DELAY:REF
ERENCE:TRACE 2
:MEASure:{CHANnel<x>|MATH<x>}:DPRoxi
mal?
Function Queries all distal, mesial, and proximal settings.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:DPRoxi
mal?
<x> of CHANnel<x> = 1 to 8
<x> of MATH<x> = 1 to 4
5.21 MEASure Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English