YOKOGAWA DLM4038 User Manual

5-153
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SEARch:PPATtern:{PODA|PODB|PODL}:PA
TTern
Function Sets or queries the logic satisfaction condition for
state or state width searching in binary notation.
Syntax
:SEARch:PPATtern:{PODA|PODB|PODL}:PA
TTern {<String>}
:SEARch:PPATtern:{PODA|PODB|PODL}:PA
TTern?
Example
:SEARCH:PPATTERN:PODL:PATTERN "1100x
x01"
:SEARCH:PPATTERN:PODL:PATTERN?
-> :SEARCH:PPATTERN:PODL:PATTERN "11
00xx01"
:SEARch:PPATtern:POLarity
Function Sets or queries the state or state width search
polarity.
Syntax
:SEARch:PPATtern:POLarity {ENTer|
EXIT|FALSe|TRUE}
:SEARch:PPATtern:POLarity?
Example
:SEARCH:PPATTERN:POLARITY ENTER
:SEARCH:PPATTERN:POLARITY?
-> :SEARCH:PPATTERN:POLARITY ENTER
Description • If you specify “
:SEARch:TYPE STATe
”, the
valid parameter values are
{ENTer|EXIT}
.
• If you specify “
:SEARch:TYPE SWIDth
”, the
valid parameter values are
{FALSe|TRUE}
.
:SEARch:PPATtern:TIME<x>
Function Sets or queries the pulse width setting for state or
state width searching.
Syntax
:SEARch:PPATtern:TIME<x> {<Time>}
:SEARch:PPATtern:TIME<x>?
<x> = 1 to 2
<Time> = 1 ns to 500 s
Example
:SEARCH:PPATTERN:TIME1 1S
:SEARCH:PPATTERN:TIME1?
-> :SEARCH:PPATTERN:TIME1 1.000E+00
:SEARch:PPATtern:TYPE
Function Sets or queries the search type setting for state
or state width searching.
Syntax
:SEARch:PPATtern:TYPE {BETWeen|IN|
NOTBetween|OUT|TIMeout}
:SEARch:PPATtern:TYPE?
Example
:SEARCH:PPATTERN:TYPE BETWEEN
:SEARCH:PPATTERN:TYPE?
-> :SEARCH:PPATTERN:TYPE BETWEEN
:SEARch:QUALify?
Function Queries all edge qualified search settings.
Syntax
:SEARch:QUALify?
:SEARch:QUALify:CONDition
Function Sets or queries the edge qualified search
condition.
Syntax
:SEARch:QUALify:CONDition {FALSe|
TRUE}
:SEARch:QUALify:CONDition?
Example
:SEARCH:QUALIFY:CONDITION FALSE
:SEARCH:QUALIFY:CONDITION?
-> :SEARCH:QUALIFY:CONDITION FALSE
:SEARch:SELect
Function Sets which detected point to display in the zoom
window and queries the zoom position of the
detected point.
Syntax
:SEARch:SELect {<NRf>|MAXimum}
:SEARch:SELect?
<NRf> = 0 to 49999
Example
:SEARCH:SELECT 1
:SEARCH:SELECT?
-> :SEARCH:SELECT 1.50000000
Description If there are no detected points, the DLM4000
returns “NAN”.
:SEARch:SELect? MAXimum
Function Queries the number of detected points.
Syntax
:SEARch:SELect? {MAXimum}
Example
:SEARCH:SELECT? MAXIMUM
-> :SEARCH:SELECT 100
Description If there are no detected points, the DLM4000
returns “NAN”.
:SEARch:SKIP?
Function Queries all skip mode settings.
Syntax
:SEARch:SKIP?
:SEARch:SKIP:DECimation
Function Sets or queries the number of detected points
that will be skipped in skip mode.
Syntax
:SEARch:SKIP:DECimation {<NRf>}
:SEARch:SKIP:DECimation?
<NRf> = 1 to 9999
Example
:SEARCH:SKIP:DECIMATION 1
:SEARCH:SKIP:DECIMATION?
-> :SEARCH:SKIP:DECIMATION 1
5.24 SEARch Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English