YOKOGAWA DLM4038 - Page 191

5-158
IM DLM4038-17EN
:SERialbus<x>:CAN:SEARch:FJUMp:CRC
Function Jumps to the CRC Field in the CAN bus signal
search result.
Syntax
:SERialbus<x>:CAN:SEARch:FJUMp:CRC
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:FJUMP:CRC
:SERialbus<x>:CAN:SEARch:FJUMp:DATA
Function Jumps to the Data Field in the CAN bus signal
search result.
Syntax
:SERialbus<x>:CAN:SEARch:FJUMp:DATA
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:FJUMP:DATA
:SERialbus<x>:CAN:SEARch:FJUMp:IDENt
ifier
Function Jumps to the Identifier in the CAN bus signal
search result.
Syntax
:SERialbus<x>:CAN:SEARch:FJUMp:IDENt
ifier
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:FJUMP:IDENTIF
IER
:SERialbus<x>:CAN:SEARch:FJUMp:SOF
Function Jumps to the SOF in the CAN bus signal search
result.
Syntax
:SERialbus<x>:CAN:SEARch:FJUMp:SOF
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:FJUMP:SOF
:SERialbus<x>:CAN:SEARch:SELect
Function Sets which detected point to display in the CAN
bus signal search zoom window and queries the
zoom position of the detected point.
Syntax
:SERialbus<x>:CAN:SEARch:
SELect {<NRf>|MAXimum}
:SERialbus<x>:CAN:SEARch:SELect?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:CAN:SEARCH:SELECT 1
:SERIALBUS1:CAN:SEARCH:SELECT?
-> :SERIALBUS1:CAN:SEARCH:SELECT 1.5
0000000
Description If there are no detected points, the DLM4000
returns “NAN” (not a number).
:SERialbus<x>:CAN:SEARch:SELect?
MAXimum
Function Queries the number of detected points in the
CAN bus signal search.
Syntax
:SERialbus<x>:CAN:SEARch:
SELect? {MAXimum}
:SERialbus<x>:CAN:SEARch:SELect?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SELECT? MAXIM
UM
-> :SERIALBUS1:CAN:SEARCH:SELECT 100
Description If there are no detected points, the DLM4000
returns “NAN” (not a number).
:SERialbus<x>:CAN:SEARch:SETup?
Function Queries all CAN bus signal search condition
settings.
Syntax
:SERialbus<x>:CAN:SEARch:SETup?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup:EFRa
me?
Function Queries all CAN bus signal search error settings.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:EFRa
me?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e[:MODE]
Function Sets or queries the CAN bus signal search error
frame setting.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e[:MODE] {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:
MODE ON
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:
MODE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:EFRA
ME:MODE 1
5.25 SERialbus Group