YOKOGAWA DLM4038 - Page 192

5-159
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:CRC
Function Sets or queries the CAN bus signal search CRC
error setting.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:CRC {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:CRC?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:
CRC ON
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:
CRC?
-> :SERIALBUS1:CAN:SEARCH:SETUP:EFRA
ME:CRC 1
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:STUFF
Function Sets or queries the CAN bus signal search stuff
error setting.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:STUFF {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup:EFRam
e:STUFF?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:
STUFF ON
:SERIALBUS1:CAN:SEARCH:SETUP:EFRAME:
STUFF?
-> :SERIALBUS1:CAN:SEARCH:SETUP:EFRA
ME:STUFF 1
:SERialbus<x>:CAN:SEARch:SETup:IDDa
ta?
Function Queries all ID and data condition settings for CAN
bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:IDDa
ta?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK?
Function Queries all ACK settings for the ID and data
conditions for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK:MODE
Function Sets or queries the ACK mode, which is one of
the ID and data conditions, for CAN bus signal
searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK:MODE {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
ACK:MODE ON
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
ACK:MODE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:ACK:MODE 1
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK:TYPE
Function Sets or queries the ACK condition, which is one
of the ID and data conditions, for CAN bus signal
searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK:TYPE {ACK|ACKBoth|NONack}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:ACK:TYPE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
ACK:TYPE ACK
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
ACK:TYPE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:ACK:TYPE ACK
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA?
Function Queries all data settings for the ID and data
conditions for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA?
<x> = 1 to 4
5.25 SERialbus Group