YOKOGAWA DLM4038 - Page 193

5-160
IM DLM4038-17EN
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:CONDition
Function Sets or queries the comparison condition, which
is one of the ID and data conditions, for CAN bus
signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:CONDition {BETWeen|EQUal|FA
LSe|GREater|LESS|NOTBetween|NOTEqul|
TRUE}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:CONDITION BETWEEN
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:CONDITION?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:CONDITION BETWEEN
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:DECimal<y>
Function Sets a reference value, which is one of the ID and
data conditions, for CAN bus signal searching in
decimal notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:DECimal<y> {<NRf>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:DECimal<y>?
<x> = 1 to 4
<y> = 1 to 2
<NRf> = See the DLM4000 Features Guide for
this information.
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:DECIMAL1 1
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:DECIMAL1?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:DECIMAL1 1.000E+00
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:DLC
Function Sets or queries the data length code (DLC), which
is one of the ID and data conditions, for CAN bus
signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:DLC {<NRf>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:DLC?
<x> = 1 to 4
<NRf> = 0 to 8
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:DLC 0
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:DLC?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:DLC 0
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:ENDian
Function Sets or queries the byte order of the reference
values, which is one of the ID and data
conditions, for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:ENDian {BIG|LITTle}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:ENDian?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:ENDIAN BIG
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:ENDIAN?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:ENDIAN BIG
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:HEXa<y>
Function Sets a reference value, which is one of the ID and
data conditions, for CAN bus signal searching in
hexadecimal notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:HEXa<y> {<String>}
<x> = 1 to 4
<y> = 1 to 8
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:HEXA1 "12"
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:MODE
Function Sets or queries the data enable/disable condition,
which is one of the ID and data conditions, for
CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:MODE {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:MODE ON
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:MODE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:MODE 1
5.25 SERialbus Group