YOKOGAWA DLM4038 - Page 194

5-161
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:MSBLsb
Function Sets or queries the MSB and LSB bits for the
data, which is one of the ID and data conditions,
for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:MSBLsb {<NRf>,<NRf>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:MSBLsb?
<x> = 1 to 4
<NRf> = 0 to 63
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:MSBLSB 1,0
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:MSBLSB?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:MSBLSB 1,0
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:PATTern<y>
Function Sets or queries the data value, which is one of
the ID and data conditions, for CAN bus signal
searching in binary notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup
[:IDData]:DATA:PATTern<y> {<String>}
:SERialbus<x>:CAN:SEARch:SETup
[:IDData]:DATA:PATTern<y>?
<x> = 1 to 4
<y> = 1 to 8
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:PATTERN1 "00110101"
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:PATTERN1?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:PATTERN1 "00110101"
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:PFORmat
Function Sets or queries the data input format, which is
one of the ID and data conditions, for CAN bus
signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:PFORmat {BINary|HEXa}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:PFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:PFORMAT BINARY
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:PFORMAT?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:PFORMAT BINARY
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:SIGN
Function Sets or queries whether signed or unsigned data
format will be used, which is one of the ID and
data conditions, for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:SIGN {SIGN|UNSign}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:DATA:SIGN?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:SIGN SIGN
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
DATA:SIGN?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:DATA:SIGN SIGN
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier?
Function Queries all identifier settings for the ID and data
conditions for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier?
<x> = 1 to 4
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:HEXa
Function Sets the ID value, which is one of the ID and
data conditions, for CAN bus signal searching in
hexadecimal notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:HEXa {<String>}
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
IDENTIFIER:HEXA "1AB"
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:MFORmat
Function Sets or queries the ID frame format (standard
or extended), which is one of the ID and data
conditions, for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SET
up[:IDData]:IDENtifier:MFORm
at {EXTended|STANdard}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:IDENtifier:MFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
IDENTIFIER:MFORMAT EXTENDED
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
IDENTIFIER:MFORMAT?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:IDENTIFIER:MFORMAT EXTENDED
5.25 SERialbus Group