YOKOGAWA DLM4038 - Page 196

5-163
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:CONDition
Function Sets or queries the signal data condition, which
is one of the ID and data conditions, for CAN bus
signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:CONDition {BETWee
n|EQUal|GREater|LESS|NOTBetween|NOTE
qul}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
MSIGNAL:SIGNAL:CONDITION BETWEEN
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
MSIGNAL:SIGNAL:CONDITION?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:MSIGNAL:SIGNAL:CONDITION BETWEEN
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:DECimal<y>
Function Sets a signal’s reference value, which is one of
the ID and data conditions, for CAN bus signal
searching in decimal notation.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:
IDData]:MSIGnal:SIGNal:DECimal<y> {<
NRf>}
:SERialbus<x>:CAN:SEARch:SETup[:
IDData]:MSIGnal:SIGNal:DECimal<y>?
<x> = 1 to 4
<y> = 1 to 2
<NRf> = See the DLM4000 Features Guide for
this information.
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
MSIGNAL:SIGNAL:DECIMAL1 1
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
MSIGNAL:SIGNAL:DECIMAL1?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:MSIGNAL:SIGNAL:DECIMAL1 1.000E+00
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:MSIGnal:SIGNal:ITEM
Function Sets the signal item, which is one of the ID and
data conditions, for CAN bus signal searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:
IDData]:MSIGnal:SIGNal:ITEM {<String
>,<String>}
<x> = 1 to 4
<String> = Up to 32 characters
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
MSIGNAL:SIGNAL:ITEM "Sig_Test",
"Mess_Test"
Description Set the signal item first and then the message
item.
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:RTR
Function Sets or queries the RTR value, which is one of
the ID and data conditions, for CAN bus signal
searching.
Syntax
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:RTR {<Boolean>}
:SERialbus<x>:CAN:SEARch:SETup[:IDDa
ta]:RTR?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
RTR ON
:SERIALBUS1:CAN:SEARCH:SETUP:IDDATA:
RTR?
-> :SERIALBUS1:CAN:SEARCH:SETUP:IDDA
TA:RTR 1
:SERialbus<x>:CAN:SEARch:SETup:MODE
Function Sets or queries the CAN bus signal search mode
setting.
Syntax
:SERialbus<x>:CAN:SEARch:SETup:MO
DE {EFRame|IDData|SOF}
:SERialbus<x>:CAN:SEARch:SETup:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CAN:SEARCH:SETUP:MODE EF
RAME
:SERIALBUS1:CAN:SEARCH:SETUP:MODE?
-> :SERIALBUS1:CAN:SEARCH:SETUP:MOD
E EFRAME
:SERialbus<x>:CANFD?
Function Queries all CAN FD bus signal settings.
Syntax
:SERialbus<x>:CANFD?
<x> = 1 to 4
:SERialbus<x>:CANFD:ANALyze?
Function Queries all CAN FD bus signal analysis settings.
Syntax
:SERialbus<x>:CANFD:ANALyze?
<x> = 1 to 4
:SERialbus<x>:CANFD[:ANALyze]:SETup?
Function Queries all CAN FD bus signal analysis bus
settings.
Syntax
:SERialbus<x>:CANFD[:ANALyze]:SETup?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:ANALYZE:SETUP?
-> :SERIALBUS1:CANFD:ANALYZE:SETUP
5.25 SERialbus Group