YOKOGAWA DLM4038 User Manual

5-166
IM DLM4038-17EN
:SERialbus<x>:CANFD:SEARch:FJUMp:DA
TA
Function Jumps to the Data Field in the CAN FD bus signal
search result.
Syntax
:SERialbus<x>:CANFD:SEARch:FJUMp:DA
TA
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:FJUMP:DATA
:SERialbus<x>:CANFD:SEARch:FJUMp:IDE
Ntifier
Function Jumps to the Identifier in the CAN FD bus signal
search result.
Syntax
:SERialbus<x>:CANFD:SEARch:FJUMp:IDE
Ntifier
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:FJUMP:IDENT
IFIER
:SERialbus<x>:CANFD:SEARch:FJUMp:SOF
Function Jumps to the SOF in the CAN FD bus signal
search result.
Syntax
:SERialbus<x>:CANFD:SEARch:FJUMp:SOF
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:FJUMP:SOF
:SERialbus<x>:CANFD:SEARch:SELect
Function Queries which detected point to display in the
CAN FD bus signal search zoom window and
queries the zoom position of the detected point.
Syntax
:SERialbus<x>:CANFD:SEARch:SELect {<
NRf>|MAXimum}
:SERialbus<x>:CANFD:SEARch:SELect?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:CANFD:SEARCH:SELECT 1
:SERIALBUS1:CANFD:SEARCH:SELECT?
-> :SERIALBUS1:CANFD:SEARCH:
SELECT 1.50000000
Description If there are no detected points, the DLM4000
returns “NAN.”
:SERialbus<x>:CANFD:SEARch:SELect?
MAXimum
Function Queries the number of detected points in the
CAN FD bus signal search.
Syntax
:SERialbus<x>:CANFD:SEARch:SELect? {
MAXimum}
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SELE
CT? MAXIMUM
-> :SERIALBUS1:CANFD:SEARCH:SELECT 1
00
Description If there are no detected points, the DLM4000
returns “NAN.”
:SERialbus<x>:CANFD:SEARch:SETup?
Function Queries all CAN FD bus signal search condition
settings.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame?
Function Queries all CAN FD bus signal search error
settings.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRC
Function Sets or queries the CAN FD bus signal search
CRC error setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRC {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRC?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:CRC ON
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:CRC?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EF
RAME:CRC 1
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor?
Function Queries all CRC error factor settings for CAN FD
bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor:CRCSequence
Function Sets or queries the CRC sequence (a CRC error
factor) for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:
EFRame:CRCEFactor:CRCSequence {<Bool
ean>}
:SERialbus<x>:CANFD:SEARch:SETup:
EFRame:CRCEFactor:CRCSequence?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRCFACTOR:CRCSEQUENCE ON
:SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRCFACTOR:CRCSEQUENCE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:
EFRAME:CRCFACTOR:CRCSEQUENCE 1
5.25 SERialbus Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English