YOKOGAWA DLM4038 User Manual

5-167
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor:SCOunt
Function Sets or queries the StuffCount (a CRC error
factor) for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor:SCOunt {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:CRCEFactor:SCOunt?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:CRCEFACTOR:SCOUNT ON
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:CRCEFACTOR:SCOUNT?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EF
RAME:CRCEFACTOR:SCOUNT 1
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:FSTuff
Function Sets or queries the CAN FD bus signal search
fixed stuff error setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:FSTuff {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:FSTuff?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:FSTUFF ON
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:FSTUFF?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EF
RAME:FSTUFF 1
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame[:MODE]
Function Sets or queries the CAN FD bus signal search
error frame setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame[:MODE] {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame[:MODE]?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:MODE ON
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:MODE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EF
RAME:MODE 1
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:STUFF
Function Sets or queries the CAN FD bus signal search
stuff error setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:STUFF {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:EFR
ame:STUFF?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:STUFF ON
:SERIALBUS1:CANFD:SEARCH:SETUP:EFRAM
E:STUFF?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:EF
RAME:STUFF 1
:SERialbus<x>:CANFD:SEARch:SETup:FDF
:CONDition
Function Sets or queries the CAN FD bus signal search
FDF condition setting.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:
FDF:CONDition {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup:
FDF:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:FDF:C
ONDITION ON
:SERIALBUS1:CANFD:SEARCH:SETUP:FDF:C
ONDITION?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:FD
F:CONDITION 1
Description When set to ON, CAN FD frames are searched.
When set to OFF, CAN frames are searched.
:SERialbus<x>:CANFD:SEARch:SETup:IDD
ata?
Function Queries all ID and data condition settings for CAN
FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup:IDD
ata?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:ACK?
Function Queries all ACK settings for the ID and data
conditions for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:ACK?
<x> = 1 to 4
5.25 SERialbus Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English