YOKOGAWA DLM4038 User Manual

5-170
IM DLM4038-17EN
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:DATA:SIGN
Function Sets or queries whether signed or unsigned data
format will be used, which is one of the ID and
data conditions, for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:DATA:SIGN {SIGN|UNSign}
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:DATA:SIGN?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:DATA:SIGN SIGN
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:DATA:SIGN?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:ID
DATA:DATA:SIGN SIGN
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier?
Function Queries all identifier settings for the ID and data
conditions for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:HEXa
Function Sets the ID value, which is one of the ID and data
conditions, for CAN FD bus signal searching in
hexadecimal notation.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:HEXa {<String>}
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:HEXA "1AB"
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:MFORmat
Function Sets or queries the ID frame format (standard
or extended), which is one of the ID and data
conditions, for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:IDENtifier:MFORmat {EXTended
|STANdard}
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:IDENtifier:MFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:MFORMAT EXTENDED
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:MFORMAT?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:ID
DATA:IDENTIFIER:MFORMAT EXTENDED
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:MODE
Function Sets or queries the ID enable/disable condition,
which is one of the ID and data conditions, for
CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:MODE {<Boolean>}
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:MODE?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:MODE ON
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:MODE?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:ID
DATA:IDENTIFIER:MODE 1
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:PATTern
Function Sets or queries the ID pattern, which is one of the
ID and data conditions, for CAN FD bus signal
searching in binary notation.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:PATTern {<String>}
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:PATTern?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:PATTERN "11100001111"
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:PATTERN?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:IDENTIFIER:PATTERN "111000011
11"
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:IDENtifier:PFORmat
Function Sets or queries the ID input format, which is one
of the ID and data conditions, for CAN FD bus
signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup
[:IDData]:IDENtifier:PFORmat {BINary
|HEXa|MESSage}
:SERialbus<x>:CANFD:SEARch:SETup
[:IDData]:IDENtifier:PFORmat?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:PFORMAT BINARY
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:IDENTIFIER:PFORMAT?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:ID
DATA:IDENTIFIER:PFORMAT BINARY
5.25 SERialbus Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English