YOKOGAWA DLM4038 User Manual

5-171
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal?
Function Queries all message and signal settings for the
ID and data conditions for CAN FD bus signal
searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:MESSage:ITEM
Function Sets the message item, which is one of the ID
and data conditions, for CAN FD bus signal
searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:MSIGnal:MESSage:ITEM {<Strin
g>}
<x> = 1 to 4
<String> = Up to 32 characters
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:MSIGNAL:MESSAGE:ITEM "TEST"
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SELect
Function Sets or queries the message and signal condition,
which is one of the ID and data conditions, for
CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:MSIGnal:SELect {MESSage|SIGN
al}
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:MSIGnal:SELect?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:MSIGNAL:SELECT MESSAGE
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:MSIGNAL:SELECT?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:ID
DATA:MSIGNAL:SELECT MESSAGE
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal?
Function Queries all signal settings for the ID and data
conditions for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal?
<x> = 1 to 4
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:CONDition
Function Sets or queries the signal data condition, which
is one of the ID and data conditions, for CAN FD
bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:CONDition {BETW
een|EQUal|GREater|LESS|NOTBetween|NO
TEqul}
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:CONDition?
<x> = 1 to 4
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:MSIGNAL:SIGNAL:CONDITION BETWEEN
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:MSIGNAL:SIGNAL:CONDITION?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SIGNAL:CONDITION BETW
EEN
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:DECimal<y>
Function Sets a signal’s reference value, which is one
of the ID and data conditions, for CAN FD bus
signal searching in decimal notation.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:DECimal<y> {<NR
f>}
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:DECimal<y>?
<x> = 1 to 4
<y> = 1 or 2
<NRf> = –9E+18 to 9E+18
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:MSIGNAL:SIGNAL:DECIMAL1 1000
:SERIALBUS1:CANFD:SEARCH:SETUP:IDDAT
A:MSIGNAL:SIGNAL:DECIMAL1?
-> :SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SIGNAL:DECIMAL1 1.000
0000E+03
:SERialbus<x>:CANFD:SEARch:SETup[:ID
Data]:MSIGnal:SIGNal:ITEM
Function Sets the signal item, which is one of the ID and
data conditions, for CAN FD bus signal searching.
Syntax
:SERialbus<x>:CANFD:SEARch:SETup[:
IDData]:MSIGnal:SIGNal:ITEM {<String
>,<String>}
<x> = 1 to 4
<String> = Up to 32 characters
Example
:SERIALBUS1:CANFD:SEARCH:SETUP:
IDDATA:MSIGNAL:SIGNAL:ITEM "Sig_
Test","Mess_Test"
Description Set the signal item first and then the message
item.
5.25 SERialbus Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English