YOKOGAWA DLM4038 User Manual

5-196
IM DLM4038-17EN
:SERialbus<x>:LIN:SEARch:FJUMp:BREak
Function Jumps to the break field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:BREak
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:BREAK
:SERialbus<x>:LIN:SEARch:FJUMp:CSUM
Function Jumps to the checksum field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:CSUM
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:CSUM
:SERialbus<x>:LIN:SEARch:FJUMp:DATA
Function Jumps to the data field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:DATA
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:DATA
:SERialbus<x>:LIN:SEARch:FJUMp:IDENt
ifier
Function Jumps to the identifier field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:IDENt
ifier
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:IDENTIF
IER
:SERialbus<x>:LIN:SEARch:FJUMp:SYNCh
Function Jumps to the sync field in the LIN bus signal
search result.
Syntax
:SERialbus<x>:LIN:SEARch:FJUMp:SYNCh
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:FJUMP:SYNCH
:SERialbus<x>:LIN:SEARch:SELect
Function Sets which detected point to display in the LIN
bus signal search zoom window and queries the
zoom position of the detected point.
Syntax
:SERialbus<x>:LIN:SEARch:SELect {<NR
f>|MAXimum}
:SERialbus<x>:LIN:SEARch:SELect?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:LIN:SEARCH:SELECT 1
:SERIALBUS1:LIN:SEARCH:SELECT?
-> :SERIALBUS1:LIN:SEARCH:SELECT 1.5
0000000
Description If there are no detected points, the DLM4000
returns “NAN” (not a number).
:SERialbus<x>:LIN:SEARch:SELect?
MAXimum
Function Queries the number of detected points in the LIN
bus signal search.
Syntax
:SERialbus<x>:LIN:SEARch:
SELect? {MAXimum}
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SELECT? MAXIM
UM
-> :SERIALBUS1:LIN:SEARCH:SELECT 100
Description If there are no detected points, the DLM4000
returns “NAN” (not a number).
:SERialbus<x>:LIN:SEARch:SETup?
Function Queries all LIN bus signal search condition
settings.
Syntax
:SERialbus<x>:LIN:SEARch:SETup?
<x> = 1 to 4
:SERialbus<x>:LIN:SEARch:SETup:ERR
or?
Function Queries all LIN bus signal search error settings.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:ERR
or?
<x> = 1 to 4
:SERialbus<x>:LIN:SEARch:SETup:ERRor
:CHECksum
Function Sets or queries the LIN bus signal search
checksum error setting.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:
ERRor:CHECksum {<Boolean>}
:SERialbus<x>:LIN:SEARch:SETup:
ERRor:CHECksum?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:ERROR:C
HECKSUM ON
:SERIALBUS1:LIN:SEARCH:SETUP:ERROR:C
HECKSUM?
-> :SERIALBUS1:LIN:SEARCH:SETUP:ERRO
R:CHECKSUM 1
:SERialbus<x>:LIN:SEARch:SETup:ERRor
:FRAMing
Function Sets or queries the LIN bus signal search framing
error setting.
Syntax
:SERialbus<x>:LIN:SEARch:SETup:
ERRor:FRAMing {<Boolean>}
:SERialbus<x>:LIN:SEARch:SETup:
ERRor:FRAMing?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:SETUP:ERROR:F
RAMING ON
:SERIALBUS1:LIN:SEARCH:SETUP:ERROR:F
RAMING?
-> :SERIALBUS1:LIN:SEARCH:SETUP:ERRO
R:FRAMING 1
5.25 SERialbus Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English