YOKOGAWA DLM4038 User Manual

5-195
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:LIN[:ANALyze]:SETup:RE
Vision
Function Sets or queries the LIN bus signal analysis
revision number.
Syntax
:SERialbus<x>:LIN[:ANALyze]:SETup:RE
Vision {BOTH|LIN1_3|LIN2_0}
:SERialbus<x>:LIN[:ANALyze]:SETup:RE
Vision?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:ANALYZE:SETUP:REVISI
ON LIN1_3
:SERIALBUS1:LIN:ANALYZE:SETUP:REVISI
ON?
-> :SERIALBUS1:LIN:ANALYZE:SETUP:REV
ISION LIN1_3
:SERialbus<x>:LIN[:ANALyze]:SETup:SO
URce
Function Sets or queries the LIN bus signal analysis
source.
Syntax
:SERialbus<x>:LIN[:ANALyze]:SETup:SO
URce {<NRf>|MATH<y>}
:SERialbus<x>:LIN[:ANALyze]:SETup:SO
URce?
<x> = 1 to 4
<NRf> = 1 to 8
<y> = 1 to 4
Example
:SERIALBUS1:LIN:ANALYZE:SETUP:SOUR
CE 1
:SERIALBUS1:LIN:ANALYZE:SETUP:SOUR
CE?
-> :SERIALBUS1:LIN:ANALYZE:SETUP:SOU
RCE 1
:SERialbus<x>:LIN[:ANALyze]:SETup:SP
Oint
Function Sets or queries the LIN bus signal sample point.
Syntax
:SERialbus<x>:LIN[:ANALyze]:SETup:SP
Oint {<NRf>}
:SERialbus<x>:LIN[:ANALyze]:SETup:SP
Oint?
<x> = 1 to 4
<NRf> = 18.8 to 90.6
Example
:SERIALBUS1:LIN:ANALYZE:SETUP:SPOI
NT 18.8
:SERIALBUS1:LIN:ANALYZE:SETUP:SPOI
NT?
-> :SERIALBUS1:LIN:ANALYZE:SETUP:SPO
INT 18.8
:SERialbus<x>:LIN:DETail?
Function Queries all LIN bus signal analysis result list
settings.
Syntax
:SERialbus<x>:LIN:DETail?
<x> = 1 to 4
:SERialbus<x>:LIN:DETail:DISPlay
Function Sets or queries the display mode for the LIN bus
signal analysis result list.
Syntax
:SERialbus<x>:LIN:DETail:DISPl
ay {FULL|LOWer|UPPer}
:SERialbus<x>:LIN:DETail:DISPlay?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:DETAIL:DISPLAY FULL
:SERIALBUS1:LIN:DETAIL:DISPLAY?
-> :SERIALBUS1:LIN:DETAIL:DISPLAY FU
LL
:SERialbus<x>:LIN:DETail:LIST:ITEM?
Function Queries all items that will be displayed in the LIN
bus signal analysis result list.
Syntax
:SERialbus<x>:LIN:DETail:LIST:ITEM?
<x> = 1 to 4
Example
:SERIALBUS1:LIN:DETAIL:LIST:ITEM?
-> :SERIALBUS1:LIN:DETAIL:LIST:IT
EM "No.,Time(ms),ID,ID-Field,Data,Ch
ecksum,Information"
:SERialbus<x>:LIN:DETail:LIST:VALue?
Function Queries all of the data for the specified analysis
number in the LIN bus signal analysis result list.
Syntax
:SERialbus<x>:LIN:DETail:LIST:VAL
ue? {<NRf>|MAXimum|MINimum}
<x> = 1 to 4
<NRf> = See the DLM4000 Features Guide for
this information.
Example
:SERIALBUS1:LIN:DETAIL:LIST:VALUE? 0
-> :SERIALBUS1:LIN:DETAIL:LIST:VALU
E"0,−1,0016,30,F0,2D04,CE,,"
:SERialbus<x>:LIN:SEARch?
Function Queries all LIN bus signal search settings.
Syntax
:SERialbus<x>:LIN:SEARch?
<x> = 1 to 4
:SERialbus<x>:LIN:SEARch:ABORt
Function Aborts the LIN bus signal search.
Syntax
:SERialbus<x>:LIN:SEARch:ABORt
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:ABORT
:SERialbus<x>:LIN:SEARch:EXECute
Function Executes a LIN bus signal search.
Syntax
:SERialbus<x>:LIN:SEARch:EXECute
<x> = 1 to 4
Example
:SERIALBUS1:LIN:SEARCH:EXECUTE
5.25 SERialbus Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English