YOKOGAWA DLM4038 - Page 241

5-208
IM DLM4038-17EN
:SERialbus<x>:SENT[:ANALyze]:SETup:F
AST:USETup:DATA<y>:ORDer
Function Sets or queries the byte order of the specified
user-defined data of the SENT signal analysis
fast channel.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:
FAST:USETup:DATA<y>:ORDer {BIG|LITTl
e}
:SERialbus<x>:SENT[:ANALyze]:SETup:
FAST:USETup:DATA<y>:ORDer?
<x> = 1 to 4
<y> = 1 to 4
Example
:SERIALBUS1:SENT:ANALYZE:SETUP:FAST:
USETUP:DATA1:ORDER BIG
:SERIALBUS1:SENT:ANALYZE:SETUP:FAST:
USETUP:DATA1:ORDER?
->:SERIALBUS1:SENT:ANALYZE:SETUP:FAS
T:USETUP:DATA1:ORDER BIG
:SERialbus<x>:SENT[:ANALyze]:SETup:F
AST:USETup:DATA<y>:SIZE
Function Sets or queries the data size of the specified
user-defined data of the SENT signal analysis
fast channel.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:F
AST:USETup:DATA<y>:SIZE {<NRf>}
:SERialbus<x>:SENT[:ANALyze]:SETup:F
AST:USETup:DATA<y>:SIZE?
<x> = 1 to 4
<y> = 1 to 4
<NRf> = 0 to 24
Example
:SERIALBUS1:SENT:ANALYZE:SETUP:FAST:
USETUP:DATA1:SIZE 24
:SERIALBUS1:SENT:ANALYZE:SETUP:FAST:
USETUP:DATA1:SIZE?
-> :SERIALBUS1:SENT:ANALYZE:SETUP:FA
ST:USETUP:DATA1:SIZE 24
:SERialbus<x>:SENT[:ANALyze]:SETup:F
AST:USETup:MULTiplexing
Function Sets or queries the enable/disable condition of
the multiplexing for the user-defined data of the
the SENT signal analysis fast channel.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:
FAST:USETup:MULTiplexing {<Boolean>}
:SERialbus<x>:SENT[:ANALyze]:FAST:
USETup:MULTiplexing?
<x> = 1 to 4
Example
:SERIALBUS1:SENT:ANALYZE:SETUP:FAST:
USETUP:MULTIPLEXING ON
:SERIALBUS1:SENT:ANALYZE:SETUP:FAST:
USETUP:MULTIPLEXING?
-> :SERIALBUS1:SENT:ANALYZE:SETUP:
FAST:USETUP:MULTIPLEXING 1
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat?
Function Queries all SENT signal analysis format settings.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat?
<x> = 1 to 4
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat:CEFactor?
Function Queries all SENT signal analysis error factor
settings.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat:CEFactor?
<x> = 1 to 4
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat:CEFactor:SAComm?
Function Queries all status and communication error factor
settings of SENT signal analysis.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat:SAComm?
<x> = 1 to 4
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat:CEFactor:SAComm:BIT<y>?
Function Queries all status and communication error factor
bit settings of SENT signal analysis.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat:SAComm:BIT<y>?
<x> = 1 to 4
<y> = 0, 1
:SERialbus<x>:SENT[:ANALyze]:SETup:F
ORMat:CEFactor:SCPulses
Function Sets or queries the consecutive calibration pulse
error factor of SENT signal analysis.
Syntax
:SERialbus<x>:SENT[:ANALyze]:SETup:
FORMat:CEFactor:SCPulses {OFF|OPT2|P
OPTion}
:SERialbus<x>:SENT[:ANALyze]:SETup:
FORMat:CEFactor:SCPulses?
<x> = 1 to 4
Example
:SERIALBUS1:SENT:ANALYZE:SETUP:FORMA
T:CEFACTOR:SCPULSES OFF
:SERIALBUS1:SENT:ANALYZE:SETUP:FORMA
T:CEFACTOR:SCPULSES?
-> :SERIALBUS1:SENT:ANALYZE:SETUP:FO
RMAT:CEFACTOR:SCPULSES OFF
5.25 SERialbus Group