YOKOGAWA DLM4038 User Manual

5-225
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:SERialbus<x>:SPATtern:SEARch:SELect
Function Sets which detected point to display in the user-
defined bus signal search zoom window and
queries the zoom position of the detected point.
Syntax
:SERialbus<x>:SPATtern:SEARch:SELe
ct {<NRf>|MAXimum}
:SERialbus<x>:SPATtern:SEARch:SELe
ct?
<x> = 1 to 4
<NRf> = 0 to 49999
Example
:SERIALBUS1:SPATTERN:SEARCH:SELECT 1
:SERIALBUS1:SPATTERN:SEARCH:SELECT?
-> :SERIALBUS1:SPATTERN:SEARCH:SELE
CT 1.50000000
Description If there are no detected points, the DLM4000
returns “NAN” (not a number).
:SERialbus<x>:SPATtern:SEARch:SELe
ct? MAXimum
Function Queries the number of detected points in the
user-defined bus signal search.
Syntax
:SERialbus<x>:SPATtern:SEARch:SELe
ct? {MAXimum}
<x> = 1 to 4
Example
:SERIALBUS1:SPATTERN:SEARCH:SELE
CT? MAXIMUM
-> :SERIALBUS1:SPATTERN:SEARCH:SELE
CT 100
Description If there are no detected points, the DLM4000
returns “NAN” (not a number).
:SERialbus<x>:SPATtern:SEARch:SETup?
Function Queries all user-defined bus signal search
condition settings.
Syntax
:SERialbus<x>:SPATtern:SEARch:SETup?
<x> = 1 to 4
:SERialbus<x>:SPATtern:SEARch:SETup:
BITSize
Function Sets or queries the bit length setting for user-
defined bus signal analysis.
Syntax
:SERialbus<x>:SPATtern:SEARch:SETup:
BITSize {<NRf>}
:SERialbus<x>:SPATtern:SEARch:SETup:
BITSize?
<x> = 1 to 4
<NRf> = 1 to 128
Example
:SERIALBUS1:SPATTERN:SEARCH:SETUP:BI
TSIZE 1
:SERIALBUS1:SPATTERN:SEARCH:SETUP:BI
TSIZE?
-> :SERIALBUS1:SPATTERN:SEARCH:SETUP
:BITSIZE 1
:SERialbus<x>:SPATtern[:ANALyze]:SET
up:LATCh:SOURce
Function Sets or queries the latch signal for user-defined
bus signal analysis.
Syntax
:SERialbus<x>:SPATtern[:ANALyze]:SET
up:LATCh:SOURce {<NRf>|NONE}
:SERialbus<x>:SPATtern[:ANALyze]:SET
up:LATCh:SOURce?
<x> = 1 to 4
<NRf> = 1 to 8
Example
:SERIALBUS1:SPATTERN:ANALYZE:SETUP:L
ATCH:SOURCE 1
:SERIALBUS1:SPATTERN:ANALYZE:SETUP:L
ATCH:SOURCE?
-> :SERIALBUS1:SPATTERN:ANALYZE:SETU
P:LATCH:SOURCE 1
Description The latch signal that you can specify varies
depending on the
:SERialbus<x>:SPATtern[
:ANALyze]:SETup:DATA:SOURce
setting.
For details, see the DLM4000 User’s Manual.
:SERialbus<x>:SPATtern[:ANALyze]:SET
up:SPOint
Function Sets or queries the analysis start point for user-
defined bus signal analysis.
Syntax
:SERialbus<x>:SPATtern[:ANALyze]:SET
up:SPOint {<NRf>}
:SERialbus<x>:SPATtern[:ANALyze]:SET
up:SPOint?
<x> = 1 to 4
<NRf> = −5 to 5 (divisions)
Example
:SERIALBUS1:SPATTERN:ANALYZE:SETUP:S
POINT−5
:SERIALBUS1:SPATTERN:ANALYZE:SETUP:S
POINT?
-> :SERIALBUS1:SPATTERN:ANALYZE:SETU
P:SPOINT−5.0000000E+00
:SERialbus<x>:SPATtern:SEARch?
Function Queries all user-defined bus signal search
settings.
Syntax
:SERialbus<x>:SPATtern:SEARch?
<x> = 1 to 4
:SERialbus<x>:SPATtern:SEARch:ABORt
Function Aborts the user-defined bus signal search.
Syntax
:SERialbus<x>:SPATtern:SEARch:ABORt
<x> = 1 to 4
Example
:SERIALBUS1:SPATTERN:SEARCH:ABORT
:SERialbus<x>:SPATtern:SEARch:EXECu
te
Function Executes a user-defined bus signal search.
Syntax
:SERialbus<x>:SPATtern:SEARch:EXECu
te
<x> = 1 to 4
Example
:SERIALBUS1:SPATTERN:SEARCH:EXECUTE
5.25 SERialbus Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English