YOKOGAWA DLM4038 - Page 281

5-248
IM DLM4038-17EN
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame[:MODE]
Function Sets or queries the CAN bus signal trigger error
frame setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame[:MODE] {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame:MODE?
Example
:TRIGGER:ATRIGGER:CAN:EFRAME:MODE ON
:TRIGGER:ATRIGGER:CAN:EFRAME:MODE?
-> :TRIGGER:ATRIGGER:CAN:EFRAME:
MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame:STUFF
Function Sets or queries the CAN bus signal trigger stuff
error setting.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame:STUFF {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
EFRame:STUFF?
Example
:TRIGGER:ATRIGGER:CAN:EFRAME:STU
FF ON
:TRIGGER:ATRIGGER:CAN:EFRAME:STUFF?
-> :TRIGGER:ATRIGGER:CAN:EFRAME:STU
FF 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDData?
Function Queries all ID and data condition settings for CAN
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN:
IDData?
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:ACK?
Function Queries all ACK settings for the ID and data
conditions for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN
[:IDData]:ACK?
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:ACK:MODE
Function Sets or queries the ACK mode, which is one of
the ID and data conditions, for CAN bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN
[:IDData]:ACK:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CAN
[:IDData]:ACK:MODE?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:ACK:MO
DE ON
:TRIGGER:ATRIGGER:CAN:IDDATA:ACK:MO
DE?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:ACK:
MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:ACK:TYPE
Function Sets or queries the ACK condition, which is one
of the ID and data conditions, for CAN bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN
[:IDData]:ACK:TYPE {ACK|ACKBoth|NONa
ck}
:TRIGger{[:ATRigger]|:BTRigger}:CAN
[:IDData]:ACK:TYPE?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:ACK:TY
PE ACK
:TRIGGER:ATRIGGER:CAN:IDDATA:ACK:TY
PE?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:ACK:
TYPE ACK
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:DATA?
Function Queries all data settings for the ID and data
conditions for CAN bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN
[:IDData]:DATA?
:TRIGger{[:ATRigger]|:BTRigger}:CAN[
:IDData]:DATA:CONDition
Function Sets or queries the comparison condition, which
is one of the ID and data conditions, for CAN bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CAN
[:IDData]:DATA:CONDition {BETWeen|EQ
Ual|FALSe|GREater|LESS|NOTBetween|NO
TEqul|TRUE}
:TRIGger{[:ATRigger]|:BTRigger}:CAN
[:IDData]:DATA:CONDition?
Example
:TRIGGER:ATRIGGER:CAN:IDDATA:DATA:CO
NDITION BETWEEN
:TRIGGER:ATRIGGER:CAN:IDDATA:DATA:CO
NDITION?
-> :TRIGGER:ATRIGGER:CAN:IDDATA:DATA
:CONDITION BETWEEN
5.34 TRIGger Group