YOKOGAWA DLM4038 - Page 290

5-257
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:ACK:MODE
Function Sets or queries the ACK mode, which is one
of the ID and data conditions, for CAN FD bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:ACK:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:ACK:MODE?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:ACK:M
ODE ON
:TRIGGER:ATRIGGER:CANFD:IDDATA:ACK:M
ODE?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:AC
K:MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:ACK:TYPE
Function Sets or queries the ACK condition, which is one
of the ID and data conditions, for CAN FD bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:ACK:TYPE {ACK|ACKBoth|NON
ack}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:ACK:TYPE?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:ACK:
TYPE ACK
:TRIGGER:ATRIGGER:CANFD:IDDATA:ACK:
TYPE?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:AC
K:TYPE ACK
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA?
Function Queries all data settings for the ID and data
conditions for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA?
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:BCOunt
Function Sets or queries the pattern comparison position,
which is one of the ID and data conditions, for
CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:BCOUNT {<NRf>}
<NRf> = 0 to 63
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
BCOUNT 4
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
BCOUNT?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:BCOUNT 4
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:CONDition
Function Sets or queries the comparison condition, which
is one of the ID and data conditions, for CAN FD
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:CONDition {BETWeen|E
QUal|FALSe|GREater|LESS|NOTBetween|N
OTEqul|TRUE}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:CONDition?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
CONDITION BETWEEN
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
CONDITION?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:CONDITION BETWEEN
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:DBYTe
Function Sets or queries the number of data bytes, which
is one of the ID and data conditions, for CAN FD
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:DBYTe {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:DBYTe?
<NRf> = 0 to 8
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
DBYTE 2
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
DBYTE?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:DBYTE 2
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:DECimal<x>
Function Sets a reference values (a, b), which is one of the
ID and data conditions, for CAN FD bus signal
triggering in decimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:DECimal<x> {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:DECimal<x>?
<x> = 1 or 2
<NRf> = –9E+18 to 9E+18
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
DECIMAL1 1
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
DECIMAL1?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:DECIMAL1 1.000E+00
5.34 TRIGger Group