YOKOGAWA DLM4038 - Page 291

5-258
IM DLM4038-17EN
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:ENDian
Function Sets or queries the byte order of the reference
values, which is one of the ID and data
conditions, for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:ENDian {BIG|LITTle}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:ENDian?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
ENDIAN BIG
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
ENDIAN?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:ENDIAN BIG
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:HEXa<x>
Function Sets a reference value, which is one of the ID and
data conditions, for CAN FD bus signal triggering
in hexadecimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:HEXa<x> {<String>}
<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
HEXA1 "12"
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:MODE
Function Sets or queries the data enable/disable condition,
which is one of the ID and data conditions, for
CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:MODE?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
MODE ON
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
MODE?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:MSBLsb
Function Sets or queries the MSB and LSB bits for the
data, which is one of the ID and data conditions,
for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:MSBLsb {<NRf>,<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:MSBLsb?
<NRf> = 0 to 63
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
MSBLSB 1,0
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
MSBLSB?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:MSBLSB 1,0
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:PATTern<x>
Function Sets or queries the data value, which is one
of the ID and data conditions, for CAN FD bus
signal triggering in binary notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:PATTern<x> {<String>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:PATTern<x>?
<x> = 1 to 8
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
PATTERN1 "00110101"
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
PATTERN1?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:PATTERN1 "00110101"
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:PFORmat
Function Sets or queries the data input format, which is
one of the ID and data conditions, for CAN FD
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:PFORmat {BINary|HEXa}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:PFORmat?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
PFORMAT BINARY
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
PFORMAT?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:PFORMAT BINARY
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:SIGN
Function Sets or queries whether signed or unsigned data
format will be used, which is one of the ID and
data conditions, for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:SIGN {SIGN|UNSign}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:DATA:SIGN?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
SIGN SIGN
:TRIGGER:ATRIGGER:CANFD:IDDATA:DATA:
SIGN?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:DA
TA:SIGN SIGN
5.34 TRIGger Group