YOKOGAWA DLM4038 User Manual

5-260
IM DLM4038-17EN
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal?
Function Queries all message and signal settings for the
ID and data conditions for CAN FD bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal?
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:MESSage:ITEM
Function Sets the message item, which is one of the ID
and data conditions, for CAN FD bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:MESSage:ITEM {<St
ring>}
<String> = Up to 32 characters
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:MSIGN
AL:MESSAGE:ITEM "TEST"
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SELect
Function Sets or queries the message and signal condition,
which is one of the ID and data conditions, for
CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SELect {MESSage|S
IGNal}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SELect?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:MSIGN
AL:SELECT MESSAGE
:TRIGGER:ATRIGGER:CANFD:IDDATA:MSIGN
AL:SELECT?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:MS
IGNAL:SELECT MESSAGE
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal?
Function Queries all signal settings for the ID and data
conditions for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal?
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal:CONDition
Function Sets or queries the signal condition, which is one
of the ID and data conditions, for CAN FD bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal:CONDiti
on {BETWeen|EQUal|GREater|LESS|NOTBe
tween|NOTEqul}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal:CONDition?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:MSIGN
AL:SIGNAL:CONDITION BETWEEN
:TRIGGER:ATRIGGER:CANFD:IDDATA:MSIGN
AL:SIGNAL:CONDITION?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:MS
IGNAL:SIGNAL:CONDITION BETWEEN
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal:DECimal<x>
Function Sets a signal’s reference value, which is one
of the ID and data conditions, for CAN FD bus
signal triggering in decimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal:DECimal
<x> {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal:DECimal
<x>?
<x> = 1 or 2
<NRf> = –9E+18 to 9E+18
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:MSIGN
AL:SIGNAL:DECIMAL1 1
:TRIGGER:ATRIGGER:CANFD:IDDATA:MSIGN
AL:SIGNAL:DECIMAL1?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:MS
IGNAL:SIGNAL:DECIMAL1 1.000E+00
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal:ITEM
Function Sets the signal item, which is one of the ID and
data conditions, for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:MSIGnal:SIGNal:ITEM {<Str
ing>,<String>}
<String> = Up to 32 characters
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:MSI
GNAL:SIGNAL:ITEM "Sig_Test","Mess_
Test"
Description Set the signal item first and then the message
item.
5.34 TRIGger Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English