YOKOGAWA DLM4038 - Page 294

5-261
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:RTR
Function Sets or queries the RTR, which is one of the
ID and data conditions, for CAN FD bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:RTR {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D[:IDData]:RTR?
Example
:TRIGGER:ATRIGGER:CANFD:IDDATA:R
TR ON
:TRIGGER:ATRIGGER:CANFD:IDDATA:RTR?
-> :TRIGGER:ATRIGGER:CANFD:IDDATA:R
TR 1
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR?
Function Queries all ID OR condition settings for CAN FD
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR?
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:ACK?
Function Queries all ACK settings for the ID OR conditions
for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:ACK?
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:ACK:MODE
Function Sets or queries the ACK mode, which is one of
the ID OR conditions, for CAN FD bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:ACK:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:ACK:MODE?
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:ACK:MO
DE ON
:TRIGGER:ATRIGGER:CANFD:IDOR:ACK:MO
DE?
-> :TRIGGER:ATRIGGER:CANFD:IDOR:ACK:
MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:ACK:TYPE
Function Sets or queries the ACK condition, which is one
of the ID OR conditions, for CAN FD bus signal
triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:ACK:TYPE {ACK|ACKBoth|NONack}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:ACK:TYPE?
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:ACK:TY
PE ACK
:TRIGGER:ATRIGGER:CAN:IDOR:ACK:TYPE?
-> :TRIGGER:ATRIGGER:CANFD:IDOR:ACK:
TYPE ACK
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:DATA?
Function Queries all data settings for the ID OR conditions
for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:DATA?
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:DATA[:MODE]
Function Sets or queries the data enable/disable condition,
which is one of the ID OR conditions, for CAN FD
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:DATA[:MODE] {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:DATA[:MODE]?
Example
:TRIGGER:ATRIGGER:CANFD:IDOR:DATA:MO
DE ON
:TRIGGER:ATRIGGER:CANFD:IDOR:DATA:MO
DE?
-> :TRIGGER:ATRIGGER:CANFD:IDOR:DATA
:MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:IDENtifier?
Function Queries all identifier settings for the ID OR
conditions for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:IDENtifier?
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:IDENtifier:ID<x>?
Function Queries all ID settings for the ID OR conditions
for CAN FD bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:CANF
D:IDOR:IDENtifier:ID<x>?
<x> = 1 to 4
5.34 TRIGger Group