YOKOGAWA DLM4038 User Manual

5-266
IM DLM4038-17EN
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:ENDian
Function Sets or queries the data field endian setting,
which is one of the ID and data conditions, for
FlexRay bus signal triggering.
Synta
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:ENDian {BIG|LIT
Tle}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:ENDian?
<x> = 1 to 2
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A1:ENDIAN BIG
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A1:ENDIAN?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
DATA1:ENDIAN BIG
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:HEXa<y>
Function Sets a data field reference value, which is one of
the ID and data conditions, for FlexRay bus signal
triggering in hexadecimal notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:HEXa<y> {<Strin
g>}
<x> = 1 to 2
<y> = 1 to 8
<String> = Two characters (each representing
a byte). Each character can be X or a
hexadecimal value from 0 to F.
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A1:HEXA1 "A9"
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:MODE
Function Sets or queries the data field enable/disable
condition, which is one of the ID and data
conditions, for FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:MODE?
<x> = 1 to 2
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A:MODE ON
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A:MODE?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
DATA:MODE 1
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:MSBLsb
Function Sets or queries the MSB and LSB bits for the data
field, which is one of the ID and data conditions,
for FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:MSBLsb {<NRf>,<
NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:MSBLsb?
<x> = 1 to 2
<NRf> = See the DLM4000 User’s Manual for
this information
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A1:MSBLSB 7,0
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A1:MSBLSB?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
DATA1:MSBLSB 7,0
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:PATTern<y>
Function Sets or queries the data field data, which is one
of the ID and data conditions, for FlexRay bus
signal triggering in binary notation.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:PATTern<y> {<St
ring>}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:PATTern<y>?
<x> = 1 to 2
<y> = 1 to 8
<String> = Eight characters (each representing a
byte). Each character can be 0, 1, or X.
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA1:DA
TA:PATTERN1 "11011111"
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A1:PATTERN1?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
DATA1:PATTERN1 "11011111"
5.34 TRIGger Group

YOKOGAWA DLM4038 Specifications

General

Brand	YOKOGAWA
Model	DLM4038
Category	Test Equipment
Language	English