YOKOGAWA DLM4038 - Page 300

5-267
IM DLM4038-17EN
Commands
1
2
3
4
5
6
App
Index
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:PFORmat
Function Sets or queries the data field data input format,
which is one of the ID and data conditions, for
FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:PFORmat {BINary
|HEXa}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:PFORmat?
<x> = 1 to 2
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A1:PFORMAT BINARY
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A1:PFORMAT?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
DATA1:PFORMAT BINARY
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:SIGN
Function Sets or queries whether a signed or unsigned
data format will be used for the data field (this is
one of the ID and data conditions) for FlexRay
bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:SIGN {SIGN|UNSi
gn}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:DATA<x>:SIGN?
<x> = 1 to 2
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A:SIGN SIGN
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:DAT
A:SIGN?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
DATA:SIGN SIGN
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID?
Function Queries all frame ID settings for the ID and data
conditions for FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID?
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:CONDition
Function Sets or queries the frame ID data condition,
which is one of the ID and data conditions, for
FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:CONDition {BETWeen|
EQUal|GREater|LESS|NOTBetween|NOTEq
ul}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:CONDition?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:CONDITION BETWEEN
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:CONDITION?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:CONDITION BETWEEN
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:ID<x>
Function Sets or queries the Frame ID value, which is one
of the ID and data conditions, for FlexRay bus
signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:ID<x> {<NRf>}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:ID<x>?
<x> = 1 to 2
<NRf> = 1 to 2047
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:ID1 100
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:ID1?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:ID1 100
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:MODE
Function Sets or queries the Frame ID enable/disable
condition, which is one of the ID and data
conditions, for FlexRay bus signal triggering.
Syntax
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:MODE {<Boolean>}
:TRIGger{[:ATRigger]|:BTRigger}:FLEX
ray[:IDData]:FID:MODE?
Example
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:MODE ON
:TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:MODE?
-> :TRIGGER:ATRIGGER:FLEXRAY:IDDATA:
FID:MODE 1
5.34 TRIGger Group